beta release of 1.9.1.1

Cast/INSTALL

+#-------------------------------------------------------------
+#  platform specific issues
+#-------------------------------------------------------------
+
+Support for shared libraries with CC 5.4 on Solaris requires libtool 1.9b 
+or later.  This also implies the use of autoconf 2.59 or later and
+automake 1.9.1 or later.  If you bootstrap, you will probably have to build 
+these yourself.  See "building autotools" below.
+
+The new libtool no longer properly supports shared libraries for gcc 2.95.2.
+If you build CLHEP with gcc 2.95.2, you must configure --disable-shared.
+
 #-------------------------------------------------------------
 #  installing from a source code tar ball
 #-------------------------------------------------------------
@@ -65,11 +77,13 @@ Now continue with directions as if you unpacked a source code tarball.
 # building autotools
 #-------------------------------------------------------------
 
-If you do not have at least autoconf 2.57 and automake 1.6, you will 
+If you do not have at least autoconf 2.59 and automake 1.9.1, you will 
 need to build autoconf, automake, and libtool.  On some platforms, 
 you may also need to build m4 and texinfo.
 
-Download the relevant tarballs from gnu.org.
+Download the relevant tarballs from gnu.org 
+(http://www.gnu.org/software/autoconf/, http://www.gnu.org/software/automake/,
+and http://www.gnu.org/software/libtool/)
 Untar them in a common source code tree.
 Decide whether you want to install them in /usr/local or your own
 install directory.  If you use your own install directory, use

Cast/configure.in

@@ -8,12 +8,12 @@
 # Identify the package and initialize the autotools:
 # ----------------------------------------------------------------------
 
-AC_PREREQ(2.57)
-AC_INIT(CLHEP Cast, 1.9.1.0, CLHEP@cern.ch, Cast)
+AC_PREREQ(2.59)
+AC_INIT(CLHEP Cast, 1.9.1.1, CLHEP@cern.ch, Cast)
 AC_CONFIG_AUX_DIR(autotools)
 AC_CANONICAL_TARGET
 AC_CONFIG_SRCDIR([src/itos.cc])
-AM_INIT_AUTOMAKE(1.6 foreign)
+AM_INIT_AUTOMAKE(1.9 foreign)
 AC_PROG_LIBTOOL
 AC_PROG_LN_S
 AC_PROG_INSTALL

ChangeLog

+Tue Sep 14          2004 Lynn Garren <garren@fnal.gov>
+
+	* require autoconf 2.59, automake 1.9.1, and libtool 1.9b
+
+Fri Sep 10          2004 Lynn Garren <garren@fnal.gov>
+
+	* Matrix: remove unnecessary copy and disable allocator
+
+Tue Aug 31         2004 Lynn Garren <garren@fnal.gov>
+	
+	* change Solaris CC compile flags from "-O -mt" to "-O"
+	* libtools 1.9b or later is required for Solaris CC
+
 Thu Jul 22         2004 Lynn Garren <garren@fnal.gov>
 	
 	* more changes for Solaris tests

Evaluator/ChangeLog

-==============================
-11.05.04 Release CLHEP-2.0.0.2
-==============================
+Tue Sep 14          2004 Lynn Garren <garren@fnal.gov>
+
+	* require autoconf 2.59, automake 1.9.1, and libtool 1.9b
+
+Tue Aug 31         2004 Lynn Garren <garren@fnal.gov>
+	
+	* change Solaris CC compile flags from "-O -mt" to "-O"
+	* libtools 1.9b or later is required for Solaris CC
 
 ==============================
-11.05.04 Release CLHEP-1.9.0.2
-==============================
-    
-==============================
-21.04.04 Release CLHEP-2.0.0.1
+30.06.04 Release CLHEP-1.9.1.0
 ==============================
 
 ==============================
-24.10.03 Release CLHEP-2.0.0.0
-==============================
+11.05.04 Release CLHEP-1.9.0.2
 
 ==============================
 23.10.03 Release CLHEP-1.9.0.0

Evaluator/INSTALL

+#-------------------------------------------------------------
+#  platform specific issues
+#-------------------------------------------------------------
+
+Support for shared libraries with CC 5.4 on Solaris requires libtool 1.9b 
+or later.  This also implies the use of autoconf 2.59 or later and
+automake 1.9.1 or later.  If you bootstrap, you will probably have to build 
+these yourself.  See "building autotools" below.
+
+The new libtool no longer properly supports shared libraries for gcc 2.95.2.
+If you build CLHEP with gcc 2.95.2, you must configure --disable-shared.
+
 #-------------------------------------------------------------
 #  installing from a source code tar ball
 #-------------------------------------------------------------
@@ -65,11 +77,13 @@ Now continue with directions as if you unpacked a source code tarball.
 # building autotools
 #-------------------------------------------------------------
 
-If you do not have at least autoconf 2.57 and automake 1.6, you will 
+If you do not have at least autoconf 2.59 and automake 1.9.1, you will 
 need to build autoconf, automake, and libtool.  On some platforms, 
 you may also need to build m4 and texinfo.
 
-Download the relevant tarballs from gnu.org.
+Download the relevant tarballs from gnu.org 
+(http://www.gnu.org/software/autoconf/, http://www.gnu.org/software/automake/,
+and http://www.gnu.org/software/libtool/)
 Untar them in a common source code tree.
 Decide whether you want to install them in /usr/local or your own
 install directory.  If you use your own install directory, use

Evaluator/configure.in

@@ -8,12 +8,12 @@
 # Identify the package and initialize the autotools:
 # ----------------------------------------------------------------------
 
-AC_PREREQ(2.57)
-AC_INIT(CLHEP Evaluator, 1.9.1.0, CLHEP@cern.ch, Evaluator)
+AC_PREREQ(2.59)
+AC_INIT(CLHEP Evaluator, 1.9.1.1, CLHEP@cern.ch, Evaluator)
 AC_CONFIG_AUX_DIR(autotools)
 AC_CANONICAL_TARGET
 AC_CONFIG_SRCDIR([src/Evaluator.cc])
-AM_INIT_AUTOMAKE(1.6 foreign)
+AM_INIT_AUTOMAKE(1.9 foreign)
 AC_PROG_LIBTOOL
 AC_PROG_INSTALL
 AC_PROG_LN_S

Exceptions/ChangeLog

+Tue Sep 14          2004 Lynn Garren <garren@fnal.gov>
+
+	* require autoconf 2.59, automake 1.9.1, and libtool 1.9b
+
+Tue Aug 31         2004 Lynn Garren <garren@fnal.gov>
+	
+	* change Solaris CC compile flags from "-O -mt" to "-O"
+	* libtools 1.9b or later is required for Solaris CC
+
 ==============================
-11.05.04 Release CLHEP-2.0.0.2
+30.06.04 Release CLHEP-1.9.1.0
 ==============================
 
 ==============================
 11.05.04 Release CLHEP-1.9.0.2
 ==============================
-    
-==============================
-21.04.04 Release CLHEP-2.0.0.1
-==============================
-
 
 Thu Nov 06          2003 Lynn Garren <garren@fnal.gov>
 
 	*  adding ZOOM Exceptions package for FNAL
 	*  adding supporting RefCount and Cast packages
 
-==============================
-24.10.03 Release CLHEP-2.0.0.0
-==============================
-
 ==============================
 23.10.03 Release CLHEP-1.9.0.0
 ==============================

Exceptions/INSTALL

+#-------------------------------------------------------------
+#  platform specific issues
+#-------------------------------------------------------------
+
+Support for shared libraries with CC 5.4 on Solaris requires libtool 1.9b 
+or later.  This also implies the use of autoconf 2.59 or later and
+automake 1.9.1 or later.  If you bootstrap, you will probably have to build 
+these yourself.  See "building autotools" below.
+
+The new libtool no longer properly supports shared libraries for gcc 2.95.2.
+If you build CLHEP with gcc 2.95.2, you must configure --disable-shared.
+
 #-------------------------------------------------------------
 #  installing from a source code tar ball
 #-------------------------------------------------------------
@@ -65,11 +77,13 @@ Now continue with directions as if you unpacked a source code tarball.
 # building autotools
 #-------------------------------------------------------------
 
-If you do not have at least autoconf 2.57 and automake 1.6, you will 
+If you do not have at least autoconf 2.59 and automake 1.9.1, you will 
 need to build autoconf, automake, and libtool.  On some platforms, 
 you may also need to build m4 and texinfo.
 
-Download the relevant tarballs from gnu.org.
+Download the relevant tarballs from gnu.org 
+(http://www.gnu.org/software/autoconf/, http://www.gnu.org/software/automake/,
+and http://www.gnu.org/software/libtool/)
 Untar them in a common source code tree.
 Decide whether you want to install them in /usr/local or your own
 install directory.  If you use your own install directory, use

Exceptions/configure.in

@@ -8,12 +8,12 @@
 # Identify the package and initialize the autotools:
 # ----------------------------------------------------------------------
 
-AC_PREREQ(2.57)
-AC_INIT(CLHEP Exceptions, 1.9.1.0, CLHEP@cern.ch, Exceptions)
+AC_PREREQ(2.59)
+AC_INIT(CLHEP Exceptions, 1.9.1.1, CLHEP@cern.ch, Exceptions)
 AC_CONFIG_AUX_DIR(autotools)
 AC_CANONICAL_TARGET
 AC_CONFIG_SRCDIR([src/ZMerrno.cc])
-AM_INIT_AUTOMAKE(1.6 foreign)
+AM_INIT_AUTOMAKE(1.9 foreign)
 AC_PROG_LIBTOOL
 AC_PROG_LN_S
 AC_PROG_INSTALL

GenericFunctions/ChangeLog

-==============================
-11.05.04 Release CLHEP-2.0.0.2
-==============================
+Tue Sep 14          2004 Lynn Garren <garren@fnal.gov>
 
-==============================
-11.05.04 Release CLHEP-1.9.0.2
-==============================
-    
-==============================
-21.04.04 Release CLHEP-2.0.0.1
-==============================
+	* require autoconf 2.59, automake 1.9.1, and libtool 1.9b
 
+Tue Aug 31         2004 Lynn Garren <garren@fnal.gov>
+	
+	* change Solaris CC compile flags from "-O -mt" to "-O"
+	* libtools 1.9b or later is required for Solaris CC
 
 ==============================
-24.10.03 Release CLHEP-2.0.0.0
+30.06.04 Release CLHEP-1.9.1.0
 ==============================
 
-Fri Oct 24          2003 Lynn Garren <garren@fnal.gov>
-
-	* tagged for CLHEP 2.0.0.0
-	
-	* backwards compatibility code disabled
+==============================
+11.05.04 Release CLHEP-1.9.0.2
+==============================
 
 ==============================
 23.10.03 Release CLHEP-1.9.0.0

GenericFunctions/INSTALL

+#-------------------------------------------------------------
+#  platform specific issues
+#-------------------------------------------------------------
+
+Support for shared libraries with CC 5.4 on Solaris requires libtool 1.9b 
+or later.  This also implies the use of autoconf 2.59 or later and
+automake 1.9.1 or later.  If you bootstrap, you will probably have to build 
+these yourself.  See "building autotools" below.
+
+The new libtool no longer properly supports shared libraries for gcc 2.95.2.
+If you build CLHEP with gcc 2.95.2, you must configure --disable-shared.
+
 #-------------------------------------------------------------
 #  installing from a source code tar ball
 #-------------------------------------------------------------
@@ -65,11 +77,13 @@ Now continue with directions as if you unpacked a source code tarball.
 # building autotools
 #-------------------------------------------------------------
 
-If you do not have at least autoconf 2.57 and automake 1.6, you will 
+If you do not have at least autoconf 2.59 and automake 1.9.1, you will 
 need to build autoconf, automake, and libtool.  On some platforms, 
 you may also need to build m4 and texinfo.
 
-Download the relevant tarballs from gnu.org.
+Download the relevant tarballs from gnu.org 
+(http://www.gnu.org/software/autoconf/, http://www.gnu.org/software/automake/,
+and http://www.gnu.org/software/libtool/)
 Untar them in a common source code tree.
 Decide whether you want to install them in /usr/local or your own
 install directory.  If you use your own install directory, use

GenericFunctions/configure.in

@@ -8,12 +8,12 @@
 # Identify the package and initialize the autotools:
 # ----------------------------------------------------------------------
 
-AC_PREREQ(2.57)
-AC_INIT(CLHEP GenericFunctions, 1.9.1.0, CLHEP@cern.ch, GenericFunctions)
+AC_PREREQ(2.59)
+AC_INIT(CLHEP GenericFunctions, 1.9.1.1, CLHEP@cern.ch, GenericFunctions)
 AC_CONFIG_AUX_DIR(autotools)
 AC_CANONICAL_TARGET
 AC_CONFIG_SRCDIR([src/Abs.cc])
-AM_INIT_AUTOMAKE(1.6 foreign)
+AM_INIT_AUTOMAKE(1.9 foreign)
 AC_PROG_LIBTOOL
 AC_PROG_INSTALL
 AC_PROG_LN_S

Geometry/ChangeLog

+Tue Sep 14          2004 Lynn Garren <garren@fnal.gov>
+
+	* require autoconf 2.59, automake 1.9.1, and libtool 1.9b
+
+Tue Aug 31         2004 Lynn Garren <garren@fnal.gov>
+	
+	* change Solaris CC compile flags from "-O -mt" to "-O"
+	* libtools 1.9b or later is required for Solaris CC
+
 ==============================
-11.05.04 Release CLHEP-2.0.0.2
+30.06.04 Release CLHEP-1.9.1.0
 ==============================
 
 ==============================
 11.05.04 Release CLHEP-1.9.0.2
 ==============================
     
-==============================
-21.04.04 Release CLHEP-2.0.0.1
-==============================
-
-==============================
-24.10.03 Release CLHEP-2.0.0.0
-==============================
-
 ==============================
 23.10.03 Release CLHEP-1.9.0.0
 ==============================

Geometry/INSTALL

+#-------------------------------------------------------------
+#  platform specific issues
+#-------------------------------------------------------------
+
+Support for shared libraries with CC 5.4 on Solaris requires libtool 1.9b 
+or later.  This also implies the use of autoconf 2.59 or later and
+automake 1.9.1 or later.  If you bootstrap, you will probably have to build 
+these yourself.  See "building autotools" below.
+
+The new libtool no longer properly supports shared libraries for gcc 2.95.2.
+If you build CLHEP with gcc 2.95.2, you must configure --disable-shared.
+
 #-------------------------------------------------------------
 #  installing from a source code tar ball
 #-------------------------------------------------------------
@@ -65,11 +77,13 @@ Now continue with directions as if you unpacked a source code tarball.
 # building autotools
 #-------------------------------------------------------------
 
-If you do not have at least autoconf 2.57 and automake 1.6, you will 
+If you do not have at least autoconf 2.59 and automake 1.9.1, you will 
 need to build autoconf, automake, and libtool.  On some platforms, 
 you may also need to build m4 and texinfo.
 
-Download the relevant tarballs from gnu.org.
+Download the relevant tarballs from gnu.org 
+(http://www.gnu.org/software/autoconf/, http://www.gnu.org/software/automake/,
+and http://www.gnu.org/software/libtool/)
 Untar them in a common source code tree.
 Decide whether you want to install them in /usr/local or your own
 install directory.  If you use your own install directory, use

Geometry/configure.in

@@ -8,12 +8,12 @@
 # Identify the package and initialize the autotools:
 # ----------------------------------------------------------------------
 
-AC_PREREQ(2.57)
-AC_INIT(CLHEP Geometry, 1.9.1.0, CLHEP@cern.ch, Geometry)
+AC_PREREQ(2.59)
+AC_INIT(CLHEP Geometry, 1.9.1.1, CLHEP@cern.ch, Geometry)
 AC_CONFIG_AUX_DIR(autotools)
 AC_CANONICAL_TARGET
 AC_CONFIG_SRCDIR([src/Plane3D.cc])
-AM_INIT_AUTOMAKE(1.6 foreign)
+AM_INIT_AUTOMAKE(1.9 foreign)
 AC_PROG_LIBTOOL
 AC_PROG_INSTALL
 AC_PROG_LN_S