E-Summary not pointing to correct TestRun on PDB after localDB upload
I am running into a very strange/worrying issue.
I am taking the example of module 20UPGM22110101
at INITIAL_WARM.
We have on our localDB a complete E-SUMMARY (objectID 659bad2a90ced8b4d72403d5):
It points e.g. to the following ADC calibration test for FE1:
INITIAL_WARM was signed-off in localDB and pushed to PDB:
When I look at the PDB record, there is indeed a E-SUMMARY for INITIAL_WARM uploaded which looks like the correct one (correct run number) with the correct link to the ADC calibration test (objectID 659678a7861aa3fc9bab65eb)
However it does not point to the correct ADC calibration test but to a previous one which was uploaded before when a previous attempt of pushing it to PDB done and failed due to PDB-internal reasons:
In particular you see that the ADC calibration test wrongly linked by the E-SUMMARY on the PDB does not contain any attachement (raw record and zip file).
The correct ADC calibration test is attached to the chip on the PDB (latest one shown below) but is not the correct one linked by the E-SUMMARY:
I guess this may be due to the fact the ADC calibration tests are duplicated and that localDB should have obsoleted the previous ones (so connected to #50 (closed)) but I prefer to report this as a separate issue.