update 345069 - 345977, add 346030

git-svn-id: svn+ssh://svn.cern.ch/reps/atlasoff/Generators/MC15JobOptions/trunk@813807 4525493e-7705-40b1-a816-d608a930855b

ChangeLog

+2018-04-19 Franziska Iltzsche <franziska.speiser@cern.ch>
+	* update 345069 - 345977
+	* add 346030
+
 2018-04-18 Josh McFayden <mcfayden@cern.ch>
 	* tagging MC15JobOptions-00-09-63
 	* Fix for csv file for 345940-2

share/DSID345xxx/MC15.345968.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v1cv1.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345968
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345969.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v0cv1.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345969
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345970.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v5cv1.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345970
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345971.MGPy8EG_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v15cv1.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345971	
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345972.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v2cv1.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345972
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345973.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c30c2v1cv1.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345973
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345974.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c32c2v1cv1.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345974
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345975.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v1cv0.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345975
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345976.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v0cv0.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345976
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID345xxx/MC15.345977.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c31c2v0cv5.py

 from MadGraphControl.MadGraphUtils import *
 
 mode=0
-mcid = 999999
+mcid = 345977
 
 #---------------------------------------------------------------------------------------------------
 # Setting parameters for param_card.dat

share/DSID346xxx/MC15.346030.MadGraphPythia8EvtGen_A14NNPDF23LO_hh_bbtt_lh_vbf_c30c2v0cv1.py

+from MadGraphControl.MadGraphUtils import *
+
+mode=0
+mcid = 346030
+
+#---------------------------------------------------------------------------------------------------
+# Setting parameters for param_card.dat
+#---------------------------------------------------------------------------------------------------
+parameters = {}
+parameters['NEW'] = {'CV':  '1.0000000',  # CV
+                     'C2V': '0.0000000',  # C2V
+                     'C3':  '0.0000000'}  # C3
+
+#---------------------------------------------------------------------------------------------------
+# Setting higgs mass to 125 GeV for param_card.dat
+#---------------------------------------------------------------------------------------------------
+higgsMass={'25':'1.250000e+02'} #MH
+
+#---------------------------------------------------------------------------------------------------
+# Setting some parameters for run_card.dat
+#---------------------------------------------------------------------------------------------------
+extras = { 'lhe_version':'2.0', 
+           'cut_decays':'F', 
+           'pdlabel':"'nn23lo1'",
+           'scale':'125',
+           'dsqrt_q2fact1':'125',
+           'dsqrt_q2fact2':'125'}
+
+#---------------------------------------------------------------------------------------------------
+# Generating di-higgs through Heavy Higgs resonance with MadGraph
+# Due to the parameters settings above, the resonant contribution is eliminated
+# Thus, the non-resonant hh production with different trilinear Higgs couplings is enabled
+#---------------------------------------------------------------------------------------------------
+fcard = open('proc_card_mg5.dat','w')
+if (runArgs.runNumber == mcid):
+    fcard.write("""
+    import model sm
+    define p = g u c d s u~ c~ d~ s~
+    define j = g u c d s u~ c~ d~ s~
+    import model /cvmfs/atlas.cern.ch/repo/sw/Generators/madgraph/models/latest/HHVBF_UFO
+    generate p p > h h j j QCD=0 
+    output -f""")
+    fcard.close()
+else: 
+    raise RuntimeError("runNumber %i not recognised in these jobOptions."%runArgs.runNumber)
+
+beamEnergy=-999
+if hasattr(runArgs,'ecmEnergy'):
+    beamEnergy = runArgs.ecmEnergy / 2.
+else: 
+    raise RuntimeError("No center of mass energy found.")
+
+#---------------------------------------------------------------------------------------------------
+# Filter efficiency is ~1%
+# Thus, setting the number of generated events to 100 times maxEvents,
+# to avoid crashing due to not having enough events
+# Also putting protection to avoid from crashing when maxEvents=-1
+#---------------------------------------------------------------------------------------------------
+safefactor=30
+nevents=5000*safefactor
+if runArgs.maxEvents > 0:
+    nevents=runArgs.maxEvents*safefactor
+
+process_dir = new_process()
+#---------------------------------------------------------------------------------------------------
+# Using the helper function from MadGraphControl for setting up the run_card
+# Build a new run_card.dat from an existing one
+# Using the values given in "extras" above for the selected parameters when setting up the run_card
+# If not set in "extras", default values are used 
+#---------------------------------------------------------------------------------------------------
+build_run_card(run_card_old=get_default_runcard(proc_dir=process_dir),run_card_new='run_card.dat',
+               nevts=nevents,rand_seed=runArgs.randomSeed,beamEnergy=beamEnergy,xqcut=0,extras=extras)
+
+
+
+#---------------------------------------------------------------------------------------------------
+# Using the helper function from MadGraphControl for setting up the param_card
+# Build a new param_card.dat from an existing one
+# Used values given in "parameters" for MHH and WHH, if not set there, default values are used
+# Higgs mass is set to 125 GeV by "higgsMass"
+#---------------------------------------------------------------------------------------------------
+build_param_card(param_card_old='%s/Cards/param_card.dat' % process_dir,param_card_new='param_card_new.dat',masses=higgsMass,params=parameters)
+   
+print_cards()
+    
+runName='run_01'     
+
+#process_dir = new_process()
+generate(run_card_loc='run_card.dat',param_card_loc='param_card_new.dat',mode=mode,proc_dir=process_dir,run_name=runName)
+
+arrange_output(run_name=runName,proc_dir=process_dir,outputDS=runName+'._00001.events.tar.gz')
+
+#---------------------------------------------------------------------------------------------------
+# Pythia8 Showering with A14_NNPDF23LO
+#---------------------------------------------------------------------------------------------------
+include("MC15JobOptions/Pythia8_A14_NNPDF23LO_EvtGen_Common.py")
+include("MC15JobOptions/Pythia8_LHEF.py")
+
+#---------------------------------------------------------------------------------------------------
+# EVGEN Configuration
+#---------------------------------------------------------------------------------------------------
+evgenConfig.generators = ["MadGraph", "Pythia8", "EvtGen"]
+if (runArgs.runNumber == mcid):
+    evgenConfig.description = "Non-resonant di-Higgs production through vector-boson-fusion (VBF) with trilinear coupling of lambda01 (SMx1) which decays to bbtautau (lephad)."
+    evgenConfig.keywords = ["BSM", "BSMHiggs", "nonResonant", "VBF", "bottom"]
+
+evgenConfig.contact = ['Danilo Ferreira de Lima <dferreir@cern.ch>', ' Puja Saha <puja.saha@cern.ch>']
+evgenConfig.inputfilecheck = runName
+runArgs.inputGeneratorFile=runName+'._00001.events.tar.gz'
+
+#---------------------------------------------------------------------------------------------------
+# Decaying hh to bbtautau with Pythia8
+# Preferred way to select particular decay channels without modifying the Higgs
+# width or cross section is to turn off all decays but those of interest, not to
+# modify the branching ratios
+#---------------------------------------------------------------------------------------------------
+genSeq.Pythia8.Commands += [ "25:onMode=off",    # turn off decay modes
+                             "25:onIfAny=5 15" ] # allow modes with b or tau
+
+#---------------------------------------------------------------------------------------------------
+# Generator Filters
+#---------------------------------------------------------------------------------------------------
+from GeneratorFilters.GeneratorFiltersConf import ParentChildFilter
+filtSeq += ParentChildFilter("hbbFilter", PDGParent = [25], PDGChild = [5])
+filtSeq += ParentChildFilter("hTauTauFilter", PDGParent = [25], PDGChild = [15])
+include("MC15JobOptions/XtoVVDecayFilterExtended.py")
+filtSeq.XtoVVDecayFilterExtended.PDGGrandParent = 25
+filtSeq.XtoVVDecayFilterExtended.PDGParent = 15
+filtSeq.XtoVVDecayFilterExtended.StatusParent = 2
+filtSeq.XtoVVDecayFilterExtended.PDGChild1 = [11, 13]
+filtSeq.XtoVVDecayFilterExtended.PDGChild2 = [24,211,213,215,311,321,323,10232,10323,20213,20232,20323,30213,100213,100323,1000213]
+#filtSeq.XtoVVDecayFilterExtended.PDGChild2 = [111,130,211,221,223,310,311,321,323]
+
+#---------------------------------------------------------------------------------------------------
+# Filter for 2 leptons (inc tau(had)) with pt cuts on e/mu and tau(had)
+#---------------------------------------------------------------------------------------------------
+from GeneratorFilters.GeneratorFiltersConf import MultiElecMuTauFilter
+filtSeq += MultiElecMuTauFilter("TauPtFilter")
+filtSeq.TauPtFilter.IncludeHadTaus = True
+filtSeq.TauPtFilter.NLeptons = 2
+filtSeq.TauPtFilter.MinPt = 13000.
+filtSeq.TauPtFilter.MinVisPtHadTau = 15000.
+filtSeq.TauPtFilter.MaxEta = 5.
+
+
+
+filtSeq.Expression = "hbbFilter and hTauTauFilter and XtoVVDecayFilterExtended and TauPtFilter"
+