athena merge requestshttps://gitlab.cern.ch/atlas/athena/-/merge_requests2024-03-04T13:13:36+01:00https://gitlab.cern.ch/atlas/athena/-/merge_requests/69399ATR-28836 - ATR-28871 - Assorted Menu actions for Delayed Jet signature2024-03-04T13:13:36+01:00Marco MontellaATR-28836 - ATR-28871 - Assorted Menu actions for Delayed Jet signatureAdded Mongroup to delayed jet triggers and added reference chains for delayed jet signature in Dev Menu
*Edited to indicate the trigger signature more precisely -- unfortunately too late for the commit.*Added Mongroup to delayed jet triggers and added reference chains for delayed jet signature in Dev Menu
*Edited to indicate the trigger signature more precisely -- unfortunately too late for the commit.*https://gitlab.cern.ch/atlas/athena/-/merge_requests/69397ATR-28888 -- Reimplement End-of-Event processing in HLT2024-03-01T20:36:12+01:00Teng Jian KhooATR-28888 -- Reimplement End-of-Event processing in HLTWe operate LAr noise burst detection and MET trigger reconstruction for monitoring in events accepted by the HLT. This sequence was lost in the CA menu generation refactoring, so reintroducing it here.
It fits more naturally in `Generat...We operate LAr noise burst detection and MET trigger reconstruction for monitoring in events accepted by the HLT. This sequence was lost in the CA menu generation refactoring, so reintroducing it here.
It fits more naturally in `GenerateMenuMT.py` than where it was previously in `HLTCFConfig.py`. Arguably even more apt [here](https://acode-browser1.usatlas.bnl.gov/lxr/source/athena/Trigger/TriggerCommon/TriggerJobOpts/python/TriggerConfig.py#0669) in `TriggerConfig.py` c.f. an old TODO note, but that option would require us to separately extract the `chainDicts`.
Sequence doesn't seem to be added correctly to `HLTFinalizeSeq` currently, needs more debugging.https://gitlab.cern.ch/atlas/athena/-/merge_requests/69390Adding the old calratio triggers to the Physics Menu2024-03-06T00:27:10+01:00Tatiana OvsiannikovaAdding the old calratio triggers to the Physics Menureverse naming of the calratio algorithm (calrtold->calratio, calratio->calratiovar) and move old calratio chains with additional emf cut for CPU reduction to the Physics Menu
- High ET chain
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1j...reverse naming of the calratio algorithm (calrtold->calratio, calratio->calratiovar) and move old calratio chains with additional emf cut for CPU reduction to the Physics Menu
- High ET chain
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1jJ160'
- 'HLT_j30_CLEANllp_momemfrac006_calratiormbib_L1jJ160'
- Calratio backup for jJ160
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1eTAU140'
- 'HLT_j30_CLEANllp_momemfrac006_calratiormbib_L1eTAU140'
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1eTAU80'
- 'HLT_j30_CLEANllp_momemfrac006_calratiormbib_L1eTAU80'
- Calratio LLP-NoMATCH analogs
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1eTAU40HT'
- 'HLT_j30_CLEANllp_momemfrac006_calratiormbib_L1eTAU40HT'
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1eTAU60HM'
- 'HLT_j30_CLEANllp_momemfrac006_calratiormbib_L1eTAU60HM'
- Calratio support chains
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1TAU40_EMPTY'
- 'HLT_j30_CLEANllp_momemfrac006_calratiormbib_L1TAU40_EMPTY'
- 'HLT_j30_CLEANllp_momemfrac006_calratio_L1TAU40_UNPAIRED_ISO'
- 'HLT_j30_CLEANllp_momemfrac006_calratiormbib_L1TAU40_UNPAIRED_ISO'
- new version of triggers with pileup recalculation, should be prescaled
- 'HLT_j30_CLEANllp_momemfrac012_calratiovar_roiftf_preselj20emf12_L1jJ160'https://gitlab.cern.ch/atlas/athena/-/merge_requests/68932TriggerMenuMT: add menu consistency checks for CA menus2024-02-15T18:42:30+01:00Frank WinklmeierTriggerMenuMT: add menu consistency checks for CA menus@mark noticed that we are missing the consistency checks in the CA menu generation. That's why the failures
seen in ATR-28793 were only visible in the few remaining legacy tests.
Requires https://gitlab.cern.ch/atlas/athena/-/merge_req...@mark noticed that we are missing the consistency checks in the CA menu generation. That's why the failures
seen in ATR-28793 were only visible in the few remaining legacy tests.
Requires https://gitlab.cern.ch/atlas/athena/-/merge_requests/68860 to be merged first.https://gitlab.cern.ch/atlas/athena/-/merge_requests/68860Physics Menu cleanup of legacy tau+x chains and fixed a typo in group name2024-02-15T16:57:08+01:00Gianantonio Pezzullog.pezzullo@yale.eduPhysics Menu cleanup of legacy tau+x chains and fixed a typo in group namePhysics Menu cleanup of legacy tau+x chains, moving them to the MC Menu: ATR-28791
Fixed typo in chains' group field: ATR-28784Physics Menu cleanup of legacy tau+x chains, moving them to the MC Menu: ATR-28791
Fixed typo in chains' group field: ATR-28784https://gitlab.cern.ch/atlas/athena/-/merge_requests/68819Adjustment for the calratio triggers to adress high rate2024-02-16T18:54:00+01:00Tatiana OvsiannikovaAdjustment for the calratio triggers to adress high rate- bring back old calratio triggers for comparison with new triggers
- make some adjustment to the new triggers to fix high rates
- add triggers with bib removal as well
-- HLT_j20_CLEANllp_momemfrac006_calratiormbib_roiftf_preselj20emf6...- bring back old calratio triggers for comparison with new triggers
- make some adjustment to the new triggers to fix high rates
- add triggers with bib removal as well
-- HLT_j20_CLEANllp_momemfrac006_calratiormbib_roiftf_preselj20emf6_L1jJ160
-- HLT_j20_CLEANllp_momemfrac006_calratiormbib_roiftf_preselj20emf6_L1eTAU60_EMPTY
-- HLT_j20_CLEANllp_momemfrac006_calratiormbib_roiftf_preselj20emf6_L1eTAU60_UNPAIRED_ISO
-- HLT_j20_CLEANllp_momemfrac006_calratiormbib_roiftf_preselj20emf6_L1eTAU40HT
-- HLT_j20_CLEANllp_momemfrac006_calratiormbib_roiftf_preselj20emf6_L1eTAU60HM
-- HLT_j20_CLEANllp_momemfrac006_calratiormbib_roiftf_preselj20emf6_L1eTAU140
- add few more chains for emf preselection comparison:
- HLT_j20_CLEANllp_momemfrac024_calratio_roiftf_preselj20emf24_L1TAU60
- HLT_j20_CLEANllp_momemfrac012_calratio_roiftf_preselj20emf12_L1T
- HLT_j30_CLEANllp_momemfrac006_calrtold_L1TAU60https://gitlab.cern.ch/atlas/athena/-/merge_requests/68719Fix for failing nightly tests2024-02-09T10:18:21+01:00Lidija ZivkovicFix for failing nightly testsThis is fixing failure in [nightly](https://test-atrvshft.web.cern.ch/test-atrvshft/ART_monitor/Monitor/Build/2024-02-07T2101/main_Athena_x86_64-el9-gcc13-opt/TriggerTest/trig_data_v1PhysP1lowMu_build)This is fixing failure in [nightly](https://test-atrvshft.web.cern.ch/test-atrvshft/ART_monitor/Monitor/Build/2024-02-07T2101/main_Athena_x86_64-el9-gcc13-opt/TriggerTest/trig_data_v1PhysP1lowMu_build)https://gitlab.cern.ch/atlas/athena/-/merge_requests/68702ATR-28264 - migrating HI Jets to CA2024-02-09T13:25:35+01:00Martin RybarATR-28264 - migrating HI Jets to CA* Migration of the HI jet trigger to CA (ATR-28264)
* Removing non-CA configuration
* Fix for ATR-28041
* Tagging @asmaga and @kciesla as HI trigger coordinators and @stapiaar as software coordinator
* CA version tested against non-CA wi...* Migration of the HI jet trigger to CA (ATR-28264)
* Removing non-CA configuration
* Fix for ATR-28041
* Tagging @asmaga and @kciesla as HI trigger coordinators and @stapiaar as software coordinator
* CA version tested against non-CA with the same trigger counts seen
* CA version tested with the full HI menu (test_trig_mc_v1DevHI_newJO_build.py)https://gitlab.cern.ch/atlas/athena/-/merge_requests/68630ATR-28761 Removal of remaining legacy combined items - J, XE2024-02-08T10:20:24+01:00Zhongyukun Xuzhongyukun.xu@cern.chATR-28761 Removal of remaining legacy combined items - J, XETo replace legacy combined items with Phase-1 and clean upTo replace legacy combined items with Phase-1 and clean uphttps://gitlab.cern.ch/atlas/athena/-/merge_requests/68265ATR-28678 - L1 Jet items legacy removal2024-02-06T22:42:30+01:00Marco RimoldiATR-28678 - L1 Jet items legacy removalThis MR is removing the some L1 Jet items legacy and replacing by the new Phase 1 trigger.
https://its.cern.ch/jira/browse/ATR-28678
- Follow-up from https://gitlab.cern.ch/atlas/athena/-/merge_requests/68248. Moving the multi-b-jet TL...This MR is removing the some L1 Jet items legacy and replacing by the new Phase 1 trigger.
https://its.cern.ch/jira/browse/ATR-28678
- Follow-up from https://gitlab.cern.ch/atlas/athena/-/merge_requests/68248. Moving the multi-b-jet TLA dev chain (https://its.cern.ch/jira/browse/ATR-23002) to Phase1 Items. cc @cantelMarco RimoldiMarco Rimoldihttps://gitlab.cern.ch/atlas/athena/-/merge_requests/68198add L1jJ160 seed since L1J100 is a legacy2024-01-18T13:34:39+01:00Tatiana Ovsiannikovaadd L1jJ160 seed since L1J100 is a legacyA small addition to Calratio triggers for next data tacking:
* Add L1jJ160 seed since L1J100 is a legacy.
* Keep L1J100 for comparison.A small addition to Calratio triggers for next data tacking:
* Add L1jJ160 seed since L1J100 is a legacy.
* Keep L1J100 for comparison.https://gitlab.cern.ch/atlas/athena/-/merge_requests/68188Moving DiPhoton TLA L1Topo Items from MC to Physics L1 Menu2024-02-02T19:44:06+01:00Marco MontellaMoving DiPhoton TLA L1Topo Items from MC to Physics L1 MenuMoving the following L1Topo algorithm to Physics L1 Menu ahead of firmware compilation:
L1_2DR15-0M30-2eEM12L, L1_13DR25-25M70-2eEM12L
Current destination is Board Topo2, FPGA 1, clock 0.
----
Tagging @rgugel for supervisionMoving the following L1Topo algorithm to Physics L1 Menu ahead of firmware compilation:
L1_2DR15-0M30-2eEM12L, L1_13DR25-25M70-2eEM12L
Current destination is Board Topo2, FPGA 1, clock 0.
----
Tagging @rgugel for supervisionhttps://gitlab.cern.ch/atlas/athena/-/merge_requests/68177test new chains for VBF HZy with invisible decay trigger ATR-284432024-01-16T16:21:11+01:00Qiuping Shentest new chains for VBF HZy with invisible decay trigger ATR-28443The merge request aims to add test chains of VBF HZy with invisible decay for ATR-28443.
We investigated dedicated triggers for VBFH HZy. The weighted PS rate and efficiency are evaluated and shown in the table. We need to know the leve...The merge request aims to add test chains of VBF HZy with invisible decay for ATR-28443.
We investigated dedicated triggers for VBFH HZy. The weighted PS rate and efficiency are evaluated and shown in the table. We need to know the level of the unique rate and cost for these under-studied triggers.![VBFH_Trig_efficiency](/uploads/af7ccf16ed81ab6fe0d23baf979b64fa/VBFH_Trig_efficiency.jpg)Qiuping ShenQiuping Shenhttps://gitlab.cern.ch/atlas/athena/-/merge_requests/68161ATR-28667 - Implementation of L1Topo ZeroBias Algorithm2024-02-05T10:10:02+01:00Marco MontellaATR-28667 - Implementation of L1Topo ZeroBias AlgorithmDraft MR tracking the development of the ZeroBias Topo algorithm.
As of Jan 15, the MR only contains a skeleton C++ ZeroBiasAlg class that does nothing beyond initialisation and definition of the relevant parameters. The class was defin...Draft MR tracking the development of the ZeroBias Topo algorithm.
As of Jan 15, the MR only contains a skeleton C++ ZeroBiasAlg class that does nothing beyond initialisation and definition of the relevant parameters. The class was defined inheriting from CountingAlg, based on the eEmMultiplicity example.
> An alternative pathway would have been to define the ZeroBiasAlg class in the python configuration inheriting from MultiplicityAlgo, following the examples in [TopoAlgos.py](https://acode-browser1.usatlas.bnl.gov/lxr/source/athena/Trigger/TriggerCommon/TriggerMenuMT/python/L1/Base/TopoAlgos.py#0226). If this alternative solution is in fact preferable I can easily switch.
Assuming the C++ path is correct, should the algorithm be instantiated and the parameters initialised in [TopoAlgoDefMultiplicity.py](https://acode-browser1.usatlas.bnl.gov/lxr/source/athena/Trigger/TriggerCommon/TriggerMenuMT/python/L1/Config/TopoAlgoDefMultiplicity.py)?
---
Tagging @astruebi @lidiaz @rgugel @jajimene (and @mark)https://gitlab.cern.ch/atlas/athena/-/merge_requests/67595TriggerMenuMT: disable menu DOT files and increase unit test timeout2023-12-05T16:42:28+01:00Frank WinklmeierTriggerMenuMT: disable menu DOT files and increase unit test timeoutDisable the generation of DOT files in the CA tests that became too slow and produces
too large of an output.
Also temporarily increase CA unit test timeout.
Relates to ATR-28608.
cc @fpastoreDisable the generation of DOT files in the CA tests that became too slow and produces
too large of an output.
Also temporarily increase CA unit test timeout.
Relates to ATR-28608.
cc @fpastorehttps://gitlab.cern.ch/atlas/athena/-/merge_requests/67142Adding Test L1 Items to MC Menu For Rate Estimate - DiPhoton TLA2023-11-16T11:25:17+01:00Marco MontellaAdding Test L1 Items to MC Menu For Rate Estimate - DiPhoton TLANew Items:
Symmetric Items:
```
L1_2DR15_0M30-2eEM12L
L1_13DR25-25M70-2eEM12L
```
Asymmetric Items:
```
L1_2DR15_0M30-eEM12LeEM9L
L1_13DR25-25M70-eEM12LeEM9L
```
And corresponding HLT items in the Dev Menu.
----
Tagging @khoo...New Items:
Symmetric Items:
```
L1_2DR15_0M30-2eEM12L
L1_13DR25-25M70-2eEM12L
```
Asymmetric Items:
```
L1_2DR15_0M30-eEM12LeEM9L
L1_13DR25-25M70-eEM12LeEM9L
```
And corresponding HLT items in the Dev Menu.
----
Tagging @khoo , @sshaw , @lidiaz , @astruebihttps://gitlab.cern.ch/atlas/athena/-/merge_requests/67128ATR-28412 test chains for DPJ VBF run32023-11-17T07:53:52+01:00Zhongyukun Xuzhongyukun.xu@cern.chATR-28412 test chains for DPJ VBF run3new triggers including lower VBF inclusive, VBF+msonly, VBF+nscan.
Under validationnew triggers including lower VBF inclusive, VBF+msonly, VBF+nscan.
Under validationZhongyukun Xuzhongyukun.xu@cern.chZhongyukun Xuzhongyukun.xu@cern.chhttps://gitlab.cern.ch/atlas/athena/-/merge_requests/66556Add L1_eEM15_EMPTY to heavy ion menu2023-10-19T10:51:12+02:00Varsha SenthilkumarAdd L1_eEM15_EMPTY to heavy ion menuhttps://gitlab.cern.ch/atlas/athena/-/merge_requests/66551adding new UPC EB chains and ID calib chain for HI2023-10-19T10:51:12+02:00Agnieszka Ewa Ogrodnikadding new UPC EB chains and ID calib chain for HIThis MR adds three new EB chains for UPC following as well as new chain for ID calib, ATR-28393
Tagging @jkremer @lidiaz @astruebi @shanisch @tnobe @vsenthil @qhu @angeramiThis MR adds three new EB chains for UPC following as well as new chain for ID calib, ATR-28393
Tagging @jkremer @lidiaz @astruebi @shanisch @tnobe @vsenthil @qhu @angeramihttps://gitlab.cern.ch/atlas/athena/-/merge_requests/66291[TriggerMenu] Added L1_gLJ80p0ETA25 and L1_gXEJWOJ100 to the HI menu CTP moni...2023-10-11T17:31:32+02:00Jean Yves Beaucampjean.yves.beaucamp@cern.ch[TriggerMenu] Added L1_gLJ80p0ETA25 and L1_gXEJWOJ100 to the HI menu CTP monitoringAdded L1_gLJ80p0ETA25 and L1_gXEJWOJ100 to the HI menu CTP monitoring (ATR-28029); removed L1_LAR-ZEE and L1_eEM9_AFP_A_OR_C to make space.Added L1_gLJ80p0ETA25 and L1_gXEJWOJ100 to the HI menu CTP monitoring (ATR-28029); removed L1_LAR-ZEE and L1_eEM9_AFP_A_OR_C to make space.