Commit 1e9e17b8 authored by Simon Spannagel's avatar Simon Spannagel
Browse files

Update Manual with framework and detector parameters, all adhere to new convention

parent 887f80a1
...@@ -194,7 +194,7 @@ All supported rotations are extrinsic active rotations, i.e. the vector itself i ...@@ -194,7 +194,7 @@ All supported rotations are extrinsic active rotations, i.e. the vector itself i
\item The intrinsic resolution of the detector can be specified using the \parameter{resolution} parameter, a two-dimensional vector holding the position resolution for the column and row directions. \item The intrinsic resolution of the detector can be specified using the \parameter{resolution} parameter, a two-dimensional vector holding the position resolution for the column and row directions.
\item The \parameter{time_offset} can be used to shift the individual detector time frames of reference to e.g.\ account for time of flight effects between different detector planes by adding a fixed offset. \item The \parameter{time_offset} can be used to shift the individual detector time frames of reference to e.g.\ account for time of flight effects between different detector planes by adding a fixed offset.
\item Pixels to be masked in the offline analysis can be placed in a separate file specified by the \parameter{mask_file} parameter explained in detail in Section~\ref{sec:masking}. \item Pixels to be masked in the offline analysis can be placed in a separate file specified by the \parameter{mask_file} parameter explained in detail in Section~\ref{sec:masking}.
\item A region of interest in the given detector can be defined using the \parameter{roi} parameter. More details on this functionality cna be found in Section~\ref{sec:roi}. \item A region of interest in the given detector can be defined using the \parameter{roi} parameter. More details on this functionality can be found in Section~\ref{sec:roi}.
\end{itemize} \end{itemize}
An example configuration file describing a setup with one CLICpix2 detector (named \parameter{016_CP_PS} and two Timepix3~\cite{timepix} detectors (\parameter{W0013_D04}and \parameter{W0013_J05}) is the following: An example configuration file describing a setup with one CLICpix2 detector (named \parameter{016_CP_PS} and two Timepix3~\cite{timepix} detectors (\parameter{W0013_D04}and \parameter{W0013_J05}) is the following:
...@@ -215,6 +215,7 @@ orientation = -0.02deg, 0.0deg, -0.015deg ...@@ -215,6 +215,7 @@ orientation = -0.02deg, 0.0deg, -0.015deg
orientation_mode = "xyz" orientation_mode = "xyz"
pixel_pitch = 25um, 25um pixel_pitch = 25um, 25um
position = -0.9mm, 0.21mm, 106.0mm position = -0.9mm, 0.21mm, 106.0mm
role = "dut"
type = "CLICpix2" type = "CLICpix2"
[W0013_J05] [W0013_J05]
...@@ -223,6 +224,7 @@ orientation = -9deg, 9deg, 0deg ...@@ -223,6 +224,7 @@ orientation = -9deg, 9deg, 0deg
orientation_mode = "xyz" orientation_mode = "xyz"
pixel_pitch = 55um, 55um pixel_pitch = 55um, 55um
position = 0um, 0um, 204mm position = 0um, 0um, 204mm
role = "reference"
type = "Timepix3" type = "Timepix3"
\end{minted} \end{minted}
......
...@@ -701,7 +701,7 @@ void ModuleManager::finaliseAll() { ...@@ -701,7 +701,7 @@ void ModuleManager::finaliseAll() {
// Write the output histogram file // Write the output histogram file
m_histogramFile->Close(); m_histogramFile->Close();
LOG(STATUS) << "Wrote histogram output file to " << global_config.getPath("histogramFile"); LOG(STATUS) << "Wrote histogram output file to " << global_config.getPath("histogram_file");
// Write out update detectors file: // Write out update detectors file:
if(global_config.has("detectors_file_updated")) { if(global_config.has("detectors_file_updated")) {
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment