Commit 4d4dc565 authored by Jens Dopke's avatar Jens Dopke
Browse files

Fixed old and new typos in Prealignment README

parent f5fe86a3
......@@ -7,7 +7,7 @@
### Description
This module performs translational telescope plane alignment. The rotational alignment is not changed.
This initial alignment along the X and Y axes is designed to be performed before the `Alignment` module, which carries out translational and rotational alignment of the planes. To not include the DUT in this transaltional alignment, it will need to be masked in the configuration file.
This initial alignment along the X and Y axes is designed to be performed before the `Alignment` module, which carries out translational and rotational alignment of the planes. To not include the DUT in this translational alignment, it will need to be masked in the configuration file.
The way in which the required translational shifts in X and Y are calculated is specified by the parameter `method`.
Either the mean of the 1D correlation histogram, its maximum or the mean of a Gaussian fit can be used to determine the translational shifts.
......@@ -21,7 +21,7 @@ However, for the prealignment this is a an acceptable estimation which works wit
* `time_cut_abs`: Specifies an absolute value for the maximum time difference between a cluster on the current detector and a cluster on the reference plane to be considered in the prealignment. Absolute and relative time cuts are mutually exclusive. No default value.
* `method`: Specifies which method should be used to compute the translational shifts. With the option `mean` the mean of the 1D correlation histogram is used. The option `maximum` uses the maximum value of the histogram. With `method` set to `gauss_fit` a Gaussian is fitted and the mean of the fit is used for the translational shift. Default is to `mean`.
* `fit_range_rel`: Parameter to set the fit range of the Gaussian fit if `method` is set to `gauss_fit`. The absolute fit range is given by `fit_range_rel` times the spatial resolution of the corresponding detector around the maximum of the 1D correlation histogram. The default of the relative fit range is `fit_range_rel` = 500.
* `range_abs`: Parameter to allow setting up the range in which residuals get plotted (mm, +- around 0). Default is `10mm`. This needs to be increased for large sensors, where the alignment might be out by well more than 10mm and thus residual plots might be emtpy in the range +- 10.
* `range_abs`: Parameter to allow setting up the range in which residuals get plotted (mm, +- around 0). Default is `10mm`. This needs to be increased for large sensors, where the alignment might be out by well more than 10mm and thus residual plots might be empty in the range +- 10.
### Plots Created
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment