Commit e9691f22 authored by Andreas Matthias Nurnberg's avatar Andreas Matthias Nurnberg
Browse files

Adding reference to manual and seminar talk

parent ab1656dc
Pipeline #253034 passed with stages
in 6 minutes and 12 seconds
......@@ -7,7 +7,7 @@ This algorithm loads raw data from a Timepix3 device and adds it to the clipboar
The data can be split into events using an event length in time, or using a maximum number of hits on a detector plane. `SpidrSignal` and `pixel` objects are loaded to the clipboard for each detector.
The hit timestamps are derived from the 40 MHz TOA counter and the fast on-pixel oscillator, which is measuring the precise hit arrival time with respect to the global 40 MHz clock. In Timepix3, the phase of the 40 MHz clock can be shifted from one double column to the next by 22.5 degree by the clock generator in order to minimize the instant digital power supply due to the pixel matrix clock tree. This mode is used in the CLICdp telescope, and thus, the column-to-column phase shift is taken into account when calculating the hit arrival times.
The hit timestamps are derived from the 40 MHz TOA counter and the fast on-pixel oscillator, which is measuring the precise hit arrival phase within to the global 40 MHz clock. In Timepix3, the phase of the 40 MHz clock can be shifted from one double column to the next by 22.5 degree by the clock generator in order to minimize the instant digital power supply due to the pixel matrix clock tree. This mode is used in the CLICdp telescope, and thus, the column-to-column phase shift is taken into account when calculating the hit arrival times. See also, Timepix3 Manual v1.9, section 3.2.1 and/or EP-ESE seminar,The Timepix3 chip, X. Llopart, https://indico.cern.ch/event/267425, slides 25 and 48.
#### Parameters
* `inputDirectory`: Path to the directory above the data directory for each device. The device name is added to the path during the algorithm.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment