Commit 99adcc5a authored by William Barter's avatar William Barter
Browse files

added back two qq mu files

parent e9652bae
Pipeline #1963598 failed with stages
in 242 minutes and 10 seconds
# EventType: 49000085
#
# Descriptor: pp -> qqbar (->muX)
# NickName: dijet=q,m110GeV,mu
# Cuts: None
# FullEventCuts: LoKi::FullGenEventCut/twoToTwoWithMuonInAcc
# Production: Pythia8
#
# InsertPythonCode:
# # Switch off all Pythia 8 options.
# from Gaudi.Configuration import importOptions
# importOptions( "$DECFILESROOT/options/SwitchOffAllPythiaProcesses.py" )
#
# # Pythia 8 options.
# from Configurables import Pythia8Production
# Generation().Special.addTool( Pythia8Production )
# Generation().Special.Pythia8Production.Commands += [
# "HardQCD::gg2gg = on", # Hard process for gluon production.
# "HardQCD::gg2qqbar = on", # qq (u,d,s) production
# "PhaseSpace:mHatMin = 110.0"] # Minimum invariant mass.
# Generation().PileUpTool = "FixedLuminosityForRareProcess"
#
# from Configurables import LoKi__FullGenEventCut
# Generation().addTool(LoKi__FullGenEventCut, 'twoToTwoWithMuonInAcc')
# cutTool = Generation().twoToTwoWithMuonInAcc
# cutTool.Code = '(count(MuonInAcc)>0) & (count(out1)==1) & (count(out2)==1)'
# cutTool.Preambulo += [
# 'from GaudiKernel.SystemOfUnits import ns, GeV, mrad',
# 'GPT = LoKi.GenParticles.TransverseMomentum()',
# 'isMuon = (GABSID == 13)',
# 'minPT = ((GTHETA < 400.0*mrad) & (GPT > 5*GeV))',
# 'MuonInAcc = ((isMuon) & (minPT))',
# 'out1 = ((GBARCODE == 5) & (GTHETA<400.0*mrad))',
# 'out2 = ((GBARCODE == 6) & (GTHETA<400.0*mrad))'
# ]
#
# # Keep 2 -> 2 hard process in MCParticles.
# from Configurables import GenerationToSimulation
# GenerationToSimulation("GenToSim").KeepCode = (
# "( GBARCODE >= 1 ) & ( GBARCODE <= 6 )")
# EndInsertPythonCode
#
#
# Documentation:
# 1-dijet production, hard process in acceptance,
# hard process mass above 110 GeV,
# muon with pt > 5GeV required in acceptance.
# EndDocumentation
#
# PhysicsWG: Exotica
# Tested: Yes
# CPUTime: 45 min
# Responsible: Matthew Bradley
# Email: mbradley@cern.ch
# Date: 20200318
#
End
# EventType: 49000083
#
# Descriptor: pp -> qqbar (->muX)
# NickName: dijet=q,m70GeV,mu
# Cuts: None
# FullEventCuts: LoKi::FullGenEventCut/twoToTwoWithMuonInAcc
# Production: Pythia8
#
# InsertPythonCode:
# # Switch off all Pythia 8 options.
# from Gaudi.Configuration import importOptions
# importOptions( "$DECFILESROOT/options/SwitchOffAllPythiaProcesses.py" )
#
# # Pythia 8 options.
# from Configurables import Pythia8Production
# Generation().Special.addTool( Pythia8Production )
# Generation().Special.Pythia8Production.Commands += [
# "HardQCD::gg2gg = on", # Hard process for gluon production.
# "HardQCD::gg2qqbar = on", # qq (u,d,s) production
# "PhaseSpace:mHatMin = 30.0", # Minimum invariant mass.
# "PhaseSpace:mHatMax = 70.0"] # Maximum invariant mass.
# Generation().PileUpTool = "FixedLuminosityForRareProcess"
#
# from Configurables import LoKi__FullGenEventCut
# Generation().addTool(LoKi__FullGenEventCut, 'twoToTwoWithMuonInAcc')
# cutTool = Generation().twoToTwoWithMuonInAcc
# cutTool.Code = '(count(MuonInAcc)>0) & (count(out1)==1) & (count(out2)==1)'
# cutTool.Preambulo += [
# 'from GaudiKernel.SystemOfUnits import ns, GeV, mrad',
# 'GPT = LoKi.GenParticles.TransverseMomentum()',
# 'isMuon = (GABSID == 13)',
# 'minPT = ((GTHETA < 400.0*mrad) & (GPT > 5*GeV))',
# 'MuonInAcc = ((isMuon) & (minPT))',
# 'out1 = ((GBARCODE == 5) & (GTHETA<400.0*mrad))',
# 'out2 = ((GBARCODE == 6) & (GTHETA<400.0*mrad))'
# ]
#
# # Keep 2 -> 2 hard process in MCParticles.
# from Configurables import GenerationToSimulation
# GenerationToSimulation("GenToSim").KeepCode = (
# "( GBARCODE >= 1 ) & ( GBARCODE <= 6 )")
# EndInsertPythonCode
#
#
# Documentation:
# q-dijet production, hard process in acceptance,
# hard process mass up to 70 GeV,
# muon with pt > 5GeV required in acceptance.
# EndDocumentation
#
# PhysicsWG: Exotica
# Tested: Yes
# CPUTime: 45 min
# Responsible: Matthew Bradley
# Email: mbradley@cern.ch
# Date: 20200318
#
End
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment