Hardware/FPGA-configuration.md

@@ -9,7 +9,7 @@ This page describes the configuration procedures for the supported FPGA boards (
 --
 The latest Enclustra Mercury KX2 FPGA boards are not configured in JTAG mode by default anymore. The board will be recognized as `FTDI Dual RS232-HS` instead of `Digilent Adept USB Device`.
 
-If this is the case, you need to download the (Windows) program *Enclustra MCT x86* from the tools section of [https://download.enclustra.com](https://download.enclustra.com/).
+If this is the case, you need to download the (Windows) program *Enclustra MCT x86* from [https://www.enclustra.com/en/products/tools/module-configuration-tool/](https://www.enclustra.com/en/products/tools/module-configuration-tool/).
 
 Fist you need to activate the option **Enable configuring any FTDI** from the *Settings* menu, then click the **Enumerate** button, select the **FTDI 2232H Configuration** *action*, select **Xilinx JTAG** from the *Device mode* drop-down menu and then click the **Set device mode** button. After a few seconds, the board should be successfully set to JTAG mode and recognized as a JTAG interface.