Hardware/FPGA-configuration.md

@@ -60,10 +60,10 @@ The IP address can be changed in different ways:
         | 0        | 1        | 192.168.10.17 |
         | 1        | 0        | 192.168.10.18 |
         | 1        | 1        | 192.168.10.19 |
-     4. Double check, that you did not place the jumper in the wrong place!
-     5. Turn the readout system on and ping the new IP address. Then change the parameter `ip` located in the the first section of the `bday53.ymal` configuration file to match the new IP address.
         ![pmod](/uploads/8e7d1d3bcd5b8262d8db673bc71004e8/pmod.png)
 *Fig. 5: BDAQ53 ip setting (example for .19)* 
+     4. Double check, that you did not place the jumper in the wrong place!
+     5. Turn the readout system on and ping the new IP address. Then change the parameter `ip` located in the the first section of the `bday53.ymal` configuration file to match the new IP address.
 
    - EEPROM configuration memory (to be implemented)