Add the chip temperature as output of UniqueIdTemp
In the System block UniqueIdTemp, please add the FPGA Chip temperature as output register.
It is already mapped on teh wishbone:
// The Wishbone interface exposes three registers:
// 0x00: Unique ID (64 bit)
// 0x02: Board temperature (32 bit, signed, 0.0625 deg/LSB)
// 0x03: FPGA temperature (32 bit, signed, 0.0625 deg/LSB)
But there is no register ouput, so it could be added as follow:
//output registers
output reg [63:0] Uid_ob64,
output reg UidValid_o,
output reg [15:0] Temp_ob16,
output reg [7:0] ChipTemp_ob8,
output reg TempRead_o,