Add BRAN module to ZDC description

ForwardDetectors/ZDC/ZDC_GeoM/src/ZDC_BRANModule.cxx

+/*
+  Copyright (C) 2002-2024 CERN for the benefit of the ATLAS collaboration
+*/
+
+#include "ZDC_BRANModule.h"
+
+#include "GeoModelKernel/GeoElement.h"
+#include "GeoModelKernel/GeoBox.h"
+#include "GeoModelKernel/GeoTube.h"
+#include "GeoModelKernel/GeoLogVol.h"
+#include "GeoModelKernel/GeoNameTag.h"
+#include "GeoModelKernel/GeoPhysVol.h"
+#include "GeoModelKernel/GeoFullPhysVol.h"
+#include "GeoModelKernel/GeoIdentifierTag.h"
+#include "GeoModelKernel/GeoAlignableTransform.h"
+#include "GeoModelKernel/GeoDefinitions.h"
+#include "GeoModelKernel/Units.h"
+#include "GaudiKernel/SystemOfUnits.h"
+#include "StoreGate/StoreGateSvc.h"
+#include "GeoModelInterfaces/StoredMaterialManager.h"
+#include "GeoModelKernel/GeoMaterial.h"
+
+
+#include "AthenaKernel/getMessageSvc.h"
+#include "CLHEP/Geometry/Transform3D.h"
+
+/*
+ * For now we create the Run3 BRAN only. The detector is a stack of plates in z
+ * with grooves milled vertically to allow channels for silica rods to be placed in.
+ * The stack ordering is Cu, Al, Cu, Cu, Al, Cu. This will be simplified here by
+ * creating a copper body with aluminum plates placed within.
+*/
+GeoFullPhysVol* ZDC_BRANModule::create(){
+
+    MsgStream LogStream(Athena::getMessageSvc(), "ZDC_ZDCModule::create");
+
+    StoredMaterialManager *materialManager = nullptr;
+    if (StatusCode::SUCCESS != m_detectorStore->retrieve(materialManager, "MATERIALS")) {
+        MsgStream LogStream(Athena::getMessageSvc(), "ZDC_ZDCModule::create");
+        LogStream << MSG::ERROR << "execute: Could not retrieve StoredMaterialManager object from the detector store" << endmsg;
+        return nullptr;
+    }
+
+    const GeoMaterial *OpAir    = materialManager->getMaterial("ZDC::opticalAir"   );
+    const GeoMaterial *OpSilica = materialManager->getMaterial("ZDC::opticalSilica");
+    const GeoMaterial *copper   = materialManager->getMaterial("std::Copper"       );
+    const GeoMaterial *aluminum = materialManager->getMaterial("std::Aluminium"    );
+
+    // geometric constants. All units are in millimeters unless otherwise specified.
+    // All dimensions are gathered from technical drawings available at TODO: insert link to tech drawings
+    const float width           = 88.0;                                               // x dimension of the module
+    const float height          = 180.0;                                              // y dimension of the module
+    const float channelSide     = 11.0;                                               // side dimension of the silica rod channels
+    const float pitch           = 2.0*channelSide;                                    // distance between adjacent silica rod channels
+    const float faceDepth       = 10.0;                                               // z depth of the front and back faces
+    const float alPlateDepth    = 14.5;                                               // z depth of the aluminum plates
+    const float innerPlateDepth = 25.5;                                               // z depth of the inner plates
+    const float rodDia          = 10.0;                                               // diameter of the silica rods
+    const float depth           = 2.0  *(faceDepth + alPlateDepth + innerPlateDepth); // y dimension of the module
+
+    GeoBox  *Cu_Body     = new GeoBox  (width       * Gaudi::Units::mm * 0.5, height * Gaudi::Units::mm * 0.5, depth        * Gaudi::Units::mm * 0.5 );
+    GeoBox  *Al_Plate    = new GeoBox  (width       * Gaudi::Units::mm * 0.5, height * Gaudi::Units::mm * 0.5, alPlateDepth * Gaudi::Units::mm * 0.5 );
+    GeoBox  *Air_Channel = new GeoBox  (channelSide * Gaudi::Units::mm * 0.5, height * Gaudi::Units::mm * 0.5, channelSide  * Gaudi::Units::mm * 0.5 );
+    GeoTube *Silica_Rod  = new GeoTube (0.0         * Gaudi::Units::mm      , rodDia * Gaudi::Units::mm * 0.5, height       * Gaudi::Units::mm * 0.5 );
+
+    GeoLogVol *Cu_Body_Logical     = new GeoLogVol("BRAN_Cu_Body_Logical"     , Cu_Body     , copper  );
+    GeoLogVol *Al_Plate_Logical    = new GeoLogVol("BRAN_Al_Plate_Logical"    , Al_Plate    , aluminum);
+    GeoLogVol *Air_Channel_Logical = new GeoLogVol("BRAN_Air_Channel_Logical" , Air_Channel , OpAir   );
+    GeoLogVol *Silica_Rod_Logical  = new GeoLogVol("BRAN_Rod_Logical"         , Silica_Rod  , OpSilica);
+
+    // Create the copper body
+    GeoFullPhysVol *Cu_Body_Physical = new GeoFullPhysVol(Cu_Body_Logical);
+
+    //Create the IDs and names here since we aren't doing any channel separation
+    Identifier airID = m_zdcID->channel_id(m_side,m_module,ZdcIDType::INACTIVE,ZdcIDVolChannel::AIR);;
+    Identifier aluID = m_zdcID->channel_id(m_side,m_module,ZdcIDType::INACTIVE,ZdcIDVolChannel::HOUSING);
+    Identifier rodID = m_zdcID->channel_id(m_side,m_module,ZdcIDType::ACTIVE,ZdcIDVolChannel::READOUT);
+
+    char airName[64], rodName[64], aluName[64];
+    sprintf(airName, "ZDC::BRAN_Air %s", airID.getString().c_str());
+    sprintf(aluName, "ZDC::BRAN_Alu %s", aluID.getString().c_str());
+    sprintf(rodName, "ZDC::BRAN_Rod %s", rodID.getString().c_str());
+
+    //Assemble the silica rods in the air channels
+    GeoFullPhysVol *Air_Channel_Pyisical = new GeoFullPhysVol(Air_Channel_Logical);
+    Air_Channel_Pyisical->add(new GeoNameTag(rodName));
+    Air_Channel_Pyisical->add(new GeoIdentifierTag(rodID.get_identifier32().get_compact()));
+    Air_Channel_Pyisical->add(new GeoAlignableTransform(GeoTrf::RotateX3D(90 * Gaudi::Units::deg)));
+    Air_Channel_Pyisical->add(new GeoFullPhysVol(Silica_Rod_Logical));
+
+    GeoFullPhysVol *Al_Plate_Physical = new GeoFullPhysVol(Al_Plate_Logical);
+
+    /*This is a strange loop but the arrangement of the rods is
+     *   ----------------------------------
+     *   |  {-1,-1}     {-1,0}     {-1,1} |
+     *   |          {-1}       {1}        |
+     *   |  {1,-1}      {1,0}      {1,1}  |
+     *   ----------------------------------
+    */
+    for(int i : {-1,1}){
+        /*************************************************
+         * Place the inner air channels with silica included
+         **************************************************/
+        Cu_Body_Physical->add(new GeoNameTag(airName));
+        Cu_Body_Physical->add(new GeoIdentifierTag(airID.get_identifier32().get_compact()));
+        Cu_Body_Physical->add(new GeoAlignableTransform(GeoTrf::TranslateX3D( i * channelSide * Gaudi::Units::mm)));
+        Cu_Body_Physical->add(Air_Channel_Pyisical);
+
+        /*************************************************
+         * Place the aluminum plates
+         **************************************************/
+        Cu_Body_Physical->add(new GeoNameTag(aluName));
+        Cu_Body_Physical->add(new GeoIdentifierTag(aluID.get_identifier32().get_compact()));
+        Cu_Body_Physical->add(new GeoAlignableTransform(GeoTrf::TranslateZ3D( i * (innerPlateDepth + alPlateDepth * 0.5) * Gaudi::Units::mm)));
+        Cu_Body_Physical->add(Al_Plate_Physical);
+
+        for(int j : {-1,0,1}){
+            /*************************************************
+             * Place the outter air channels
+             **************************************************/
+            Cu_Body_Physical->add(new GeoNameTag(airName));
+            Cu_Body_Physical->add(new GeoIdentifierTag(airID.get_identifier32().get_compact()));
+            Cu_Body_Physical->add(new GeoAlignableTransform(GeoTrf::Translate3D( j * pitch * Gaudi::Units::mm, 0.0, i * (innerPlateDepth - channelSide) * Gaudi::Units::mm )));
+            Cu_Body_Physical->add(Air_Channel_Pyisical);
+        }
+    }
+
+    return Cu_Body_Physical;
+
+}
\ No newline at end of file

ForwardDetectors/ZDC/ZDC_GeoM/src/ZDC_BRANModule.h

+/*
+  Copyright (C) 2002-2024 CERN for the benefit of the ATLAS collaboration
+*/
+
+#ifndef ZDC_BRANMODULE_H
+#define ZDC_BRANMODULE_H
+
+#include "ZDC_ModuleBase.h"
+
+class ZDC_BRANModule : public ZDC_ModuleBase{
+  public:
+    // Just use the inherited constructor
+    using ZDC_ModuleBase::ZDC_ModuleBase;
+
+    virtual ~ZDC_BRANModule() = default;
+
+    virtual GeoFullPhysVol* create() override;
+
+};
+
+
+#endif
\ No newline at end of file

ForwardDetectors/ZDC/ZDC_GeoM/src/ZDC_DetFactory.h

 /*
-  Copyright (C) 2002-2023 CERN for the benefit of the ATLAS collaboration
+  Copyright (C) 2002-2024 CERN for the benefit of the ATLAS collaboration
 */
 
 #ifndef ZDC_DETFACTORY_H
@@ -36,14 +36,23 @@ public:
 
 private:
 
+<<<<<<< HEAD
   ZDC_DetManager *m_detectorManager{};
   StoreGateSvc *m_detectorStore{};
   const ZdcID *m_zdcID{};
   bool m_RPDs_On{}; //Flag for both RPD modules
+=======
+  ZDC_DetManager *m_detectorManager;
+  StoreGateSvc *m_detectorStore;
+  const ZdcID *m_zdcID;
+  bool m_RPDs_On; //Flag for both RPD modules
+  bool m_BRANs_On; //Flag for both BRAN modules
+>>>>>>> 3e23e3da737 (Add BRAN module to ZDC description)
   std::vector< std::vector< bool > > m_zdcOn;
   std::vector< std::vector< float > > m_zdcPos; //Positions of the ZDC modules
   std::vector< std::vector< std::pair<int,int> > > m_zdcPixelStart_Stop; //Start and stop layers of the pixels for a given ZDC module
   std::vector< float > m_rpdPos; //Positions of the RPD modules
+  std::vector< float > m_branPos; //Positions of the BRAN modules
 };