change mass window for Lb2EtacKp lines for 2017 restripping
We would like to change the mass window for Lb->etacpK lines from 2.8GeV - 3.2GeV to 2.7GeV - 3.3GeV. This has been implemented in the restripping of other run2 data-taking years.
The rate and multiplicity are tested locally using 20000 test events. Before the change it is:
StrippingReport INFO Event 20000, Good event 20000
| *Decision name*|*Rate,%*|*Accepted*| *Mult*|*ms/evt*|
|_StrippingGlobal_ | 0.1450| 29| | 10.985|
|_StrippingSequenceStreamBhadron_ | 0.1450| 29| | 10.972|
|!StrippingLb2EtacKp_KsKPiLine | 0.0150| 3| 1.667| 9.053|
|!StrippingLb2EtacKp_PPbarLine | 0.0100| 2| 1.000| 0.044|
|!StrippingLb2EtacKp_4hLine | 0.1350| 27| 2.778| 0.350|
|!StrippingLb2EtacKp_KsKPiLine_TIMING | 0.0150| 3| 1.667| 0.035|
|!StrippingLb2EtacKp_PPbarLine_TIMING | 0.0100| 2| 1.000| 0.038|
|!StrippingLb2EtacKp_4hLine_TIMING | 0.1350| 27| 2.778| 0.051|
After the change, the result is:
StrippingReport INFO Event 20000, Good event 20000
| *Decision name*|*Rate,%*|*Accepted*| *Mult*|*ms/evt*|
|_StrippingGlobal_ | 0.1800| 36| | 12.487|
|_StrippingSequenceStreamBhadron_ | 0.1800| 36| | 12.473|
|!StrippingLb2EtacKp_KsKPiLine | 0.0400| 8| 1.625| 10.296|
|!StrippingLb2EtacKp_PPbarLine | 0.0100| 2| 1.500| 0.050|
|!StrippingLb2EtacKp_4hLine | 0.1600| 32| 3.719| 0.446|
|!StrippingLb2EtacKp_KsKPiLine_TIMING | 0.0400| 8| 1.625| 0.045|
|!StrippingLb2EtacKp_PPbarLine_TIMING | 0.0100| 2| 1.500| 0.037|
|!StrippingLb2EtacKp_4hLine_TIMING | 0.1600| 32| 3.719| 0.059|
I'd appreciate it if you could let me know when it's fine to remove the WIP label.
Edited by Valeriia Zhovkovska