Skip to content

GitLab

Commit 76230bbf authored by Leif Lonnblad's avatar Leif Lonnblad
Browse files

This commit was manufactured by cvs2svn to create tag 

'CLHEP_1_9_3_0'.
parent cbf6459a
Hide whitespace changes
Inline Side-by-side
Utilities/.cvsignore deleted 100755 → 0
View file @ cbf6459a
Makefile.in
configure
aclocal.m4
autom4te.cache
config.h.in
Utilities/INSTALL deleted 100755 → 0
View file @ cbf6459a
#-------------------------------------------------------------
# platform specific issues
#-------------------------------------------------------------
This package requires autoconf 2.59 or later and automake 1.9.1 or later.
If you bootstrap, you will probably have to build these yourself.
See "building autotools" below.
The new libtool no longer properly supports shared libraries for gcc 2.95.2.
If you build CLHEP with gcc 2.95.2, you must configure --disable-shared.
To build for Solaris CC, configure with CXX=CC CC=cc and use gmake.
On MacOSX, you need to define MACOSX_DEPLOYMENT_TARGET appropriately.
For instance, set MACOSX_DEPLOYMENT_TARGET to "10.4" if you
have MacOS 10.4 installed on your system.
#-------------------------------------------------------------
# installing from a source code tar ball
#-------------------------------------------------------------
Unwind the source code tar ball in some relevant directory.
Autoconf and automake will aready have been run.
Determine where the files will be installed.
Create a build directory that is NOT in the source code directory tree.
cd <build_directory>
<source_code_direcotry>/configure --prefix=<install_dir>
(Note that files will be installed under /usr/local if you do not
specify a prefix.)
make
(Build temporary copies of libraries and executables.)
make check
(Run the tests.)
make install
(Copy libraries, headers, executables, etc. to relevant
subdirectories under <install_dir>.)
#-------------------------------------------------------------
# configure options
#-------------------------------------------------------------
A variety of options can be given to configure. Below is a list
of the options that you are likely to find most useful.
--help provides a partial list of options
--prefix=PREFIX install architecture-independent files in PREFIX
[default is /usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[default is the same as PREFIX]
--disable-shared build only static libraries
--disable-static build only shared libraries
--enable-exceptions use the CLHEP/Exceptions package
--disable-exceptions DO NOT use the CLHEP/Exceptions package
[--disable-exceptions is the default]
#-------------------------------------------------------------
# building documents
#-------------------------------------------------------------
Documents are neither built nor installed automatically.
Use the following commands to build and install documents:
make docs
make install-docs
#-------------------------------------------------------------
# building from cvs
#-------------------------------------------------------------
You will need current versions of automake, autoconf, and libtool.
See building autotools below.
cvs co CLHEP/package OR cvs co package
cd [CLHEP/]package
./bootstrap
Now continue with directions as if you unpacked a source code tarball.
#-------------------------------------------------------------
# building autotools
#-------------------------------------------------------------
If you do not have at least autoconf 2.59 and automake 1.9.1, you will
need to build autoconf, automake, and libtool. On some platforms,
you may also need to build m4 and texinfo.
Download the relevant tarballs from gnu.org
(http://www.gnu.org/software/autoconf/, http://www.gnu.org/software/automake/,
and http://www.gnu.org/software/libtool/)
Untar them in a common source code tree.
Decide whether you want to install them in /usr/local or your own
install directory. If you use your own install directory, use
--prefix=<install_dir>
with configure.
For each autotool package:
<source_code_dir>/configure [--prefix=<install_dir>]
make
make install
Make sure that <install_dir>/bin is at the front of your path.
#-------------------------------------------------------------
Utilities/Makefile.am deleted 100755 → 0
View file @ cbf6459a
## Process this file with automake to produce Makefile.in
if USE_GMAKE
MAKE = gmake
endif
includedir = $(prefix)/include/CLHEP
SUBDIRS = Utilities
docs:
cd doc; $(MAKE) $(AM_MAKEFLAGS)
install-docs:
cd doc; $(MAKE) $(AM_MAKEFLAGS) install-docs
Utilities/Utilities/CLHEP.h deleted 100755 → 0
View file @ cbf6459a
// $Id: CLHEP.h,v 1.1.1.1 2003/07/15 20:15:05 garren Exp $
// ----------------------------------------------------------
// For backward compatibility
//
#include "CLHEP/config/CLHEP.h"
#include "CLHEP/config/TemplateFunctions.h"
Utilities/Utilities/Makefile.am deleted 100755 → 0
View file @ cbf6459a
## Process this file with automake to produce Makefile.in
if USE_GMAKE
MAKE = gmake
endif
includedir = $(prefix)/include/CLHEP
pkginclude_HEADERS = \
fortran.h \
defs.h
# Identify generated file(s) to be removed when 'make clean' is requested:
CLEANFILES = defs.h
Utilities/Utilities/fortran.h deleted 100755 → 0
View file @ cbf6459a
// -*- C++ -*-
// CLASSDOC OFF
// $Id: fortran.h,v 1.2 2003/08/13 20:00:14 garren Exp $
// ---------------------------------------------------------------------------
// CLASSDOC ON
//
// This file is a part of what might become CLHEP -
// a Class Library for High Energy Physics.
//
// This file contains definitions of macros for declaring and using
// FORTRAN commonblocks and routines in C++ code. It is assumed that
// the default f77 compiler is used for the supported platforms (currently
// HP9000, apollo, decstation, NeXT (using f2c)). If f2c is used, the f2c.h
// file should be included befor this one. If the FORTRAN_PPU macro is
// defined to 1 before this file is included, an underscore will always be
// post-pended to any fortran name. If it is defined to 0, no underclore will
// be post-pended. If FORTRAN_PPU is not defined, an intelligent guess is
// performed in this file.
//
//.SS Usage:
//
// a fortran subroutine delcared as e.g.
//
// .ft B
// SUBROUTINE GOGEN (U0,P0,NP,M,U,P)
//
// with
//
// .ft B
// REAL U0,P0(4),M(30),U(30),P(4,30)
// .fi
// INTEGER NP(2)
//
// should be declared as
//
// .ft B
// extern "C" {
// .fi
// extern void
// .fi
// FORTRAN_ROUTINE(gogen)(float*,float[4],int[2],float[30],float[30][4]);
// .fi
// }
//
// and called by
//
// .ft B
// FORTRAN_ROUTINE(gogen)(&U0, P0, NP, M, U, P1);
//
// a fortran common block declared as e.g.
//
// .ft B
// COMMON /LUJETS/ N,K(4000,5),P(4000,5),V(4000,5)
//
// using normal implicit rules should be declared as
//
// .ft B
// extern "C" {
// .fi
// BEGIN_FORTRAN_COMMON(lujets)
// .fi
// int n;
// .fi
// int k[5][4000];
// .fi
// float p[5][4000];
// .fi
// float v[5][4000];
// .fi
// END_FORTRAN_COMMON(lujets)
// .fi
// }
//
// and accessed by eg.
//
// .ft B
// FORTRAN_COMMON(lujets).k[2][FORTRAN_COMMON(lujets).n-4] = 2;
//
// Author: Leif Lonnblad
//
// fortran.h,v 1.2 1992/11/30 12:31:26 lonnblad Exp
#ifndef _FORTRAN_H_
#define _FORTRAN_H_
#include "CLHEP/Utilities/defs.h"
#ifdef FORTRAN_PPU
#define ADD_UNDERSCORE(name) name ## _
#else
#define ADD_UNDERSCORE(name) name
#endif
//#if defined(__apollo) && !defined(USING_F2C)
#ifdef __apollo
#ifndef USING_F2C
#define BEGIN_FORTRAN_COMMON(name) struct {
#define END_FORTRAN_COMMON(name) \
} ADD_UNDERSCORE(name) __attribute((__section(ADD_UNDERSCORE(name))));
#define FORTRAN_COMMON(name) ADD_UNDERSCORE(name)
#define FORTRAN_ROUTINE(name) ADD_UNDERSCORE(name)
#define FORTRAN_LOGICAL int
#else
#define BEGIN_FORTRAN_COMMON(name) extern struct {
#define END_FORTRAN_COMMON(name) } ADD_UNDERSCORE(name);
#define FORTRAN_COMMON(name) ADD_UNDERSCORE(name)
#define FORTRAN_ROUTINE(name) ADD_UNDERSCORE(name)
#define FORTRAN_LOGICAL long
#endif
#else
#define BEGIN_FORTRAN_COMMON(name) extern struct {
#define END_FORTRAN_COMMON(name) } ADD_UNDERSCORE(name);
#define FORTRAN_COMMON(name) ADD_UNDERSCORE(name)
#define FORTRAN_ROUTINE(name) ADD_UNDERSCORE(name)
#define FORTRAN_LOGICAL long
#endif
#endif // _FORTRAN_H_
Utilities/autotools/.cvsignore deleted 100755 → 0
View file @ cbf6459a
config.sub
config.guess
depcomp
install-sh
missing
mkinstalldirs
Utilities/autotools/ltmain.sh deleted 100755 → 0
View file @ cbf6459a
Changes suppressed. Click to show.
# Generated from ltmain.in; do not edit by hand
# ltmain.sh (GNU libtool) 1.9b
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Usage: $progname [OPTION]... [MODE-ARG]...
#
# Provide generalized library-building support services.
#
# --config show all configuration variables
# --debug enable verbose shell tracing
# -n, --dry-run display commands without modifying any files
# --features display basic configuration information and exit
# --mode=MODE use operation mode MODE
# --preserve-dup-deps don't remove duplicate dependency libraries
# --quiet, --silent don't print informational messages
# --tag=TAG use configuration variables from tag TAG
# --version print version information
# -h, --help print short or long help message
#
# MODE must be one of the following:
#
# clean remove files from the build directory
# compile compile a source file into a libtool object
# execute automatically set library path, then run a program
# finish complete the installation of libtool libraries
# install install libraries or executables
# link create a library or an executable
# uninstall remove libraries from an installed directory
#
# MODE-ARGS vary depending on the MODE.
# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
#
# When reporting a bug, please describe a test case to reproduce it and
# include the following information:
#
# host-triplet: powerpc-apple-darwin7.5.0
# shell: $SHELL
# compiler: $LTCC
# linker: $LD (gnu? $with_gnu_ld)
# $progname: (GNU libtool) 1.9b
# automake: $automake_version
# autoconf: $autoconf_version
#
# Report bugs to <bug-libtool@gnu.org>.
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
elif test -n "${BASH_VERSION+set}${KSH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
DUALCASE=1; export DUALCASE # for MKS sh
dirname="s,/[^/]*$,,"
basename="s,^.*/,,g"
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath="$0"
# The name of this program:
PROGRAM=ltmain.sh
progname=`echo "$progpath" | $SED "$basename"`
# Make sure we have an absolute path for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*) progdir=`echo "$progpath" | $SED "$dirname"`
progdir=`cd "$progdir" && pwd`
progpath="$progdir/$progname"
;;
esac
# Global variables:
EXIT_SUCCESS=0
EXIT_FAILURE=1
EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=1.9b
TIMESTAMP=""
package_revision=1.1571
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
# Yippee, $echo works!
:
else
# Restart under the correct shell, and then maybe $echo will work.
exec $SHELL "$progpath" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
cat <<EOF
$*
EOF
exit $EXIT_SUCCESS
fi
default_mode=
help="Try \`$progname --help' for more information."
magic="%%%MAGIC variable%%%"
mkdir="mkdir"
mv="mv -f"
rm="rm -f"
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
case `echo A|tr A '\301'` in
A) # EBCDIC based system
SP2NL="tr '\100' '\n'"
NL2SP="tr '\r\n' '\100\100'"
;;
*) # Assume ASCII based system
SP2NL="tr '\040' '\012'"
NL2SP="tr '\015\012' '\040\040'"
;;
esac
# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
if test "${LC_ALL+set}" = set; then
save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
fi
if test "${LANG+set}" = set; then
save_LANG="$LANG"; LANG=C; export LANG
fi
# Make sure IFS has a sensible default
: ${IFS="
"}
# Global variables.
mode=$default_mode
nonopt=
run=
show="$echo"
execute_dlfiles=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
opt_help=false
opt_duplicate_deps=false
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
exec_cmd=
# func_echo arg...
# Echo program name prefixed message, along with the current mode
# name if it has been set yet.
func_echo ()
{
$echo $progname${mode+: }$mode: ${1+"$@"}
}
# func_verbose arg...
# Echo program name prefixed message in verbose mode only.
func_verbose ()
{
$opt_verbose && func_echo ${1+"$@"}
}
# func_error arg...
# Echo program name prefixed message to standard error.
func_error ()
{
$echo $progname${mode+: }$mode: ${1+"$@"} 1>&2
}
# func_warning arg...
# Echo program name prefixed warning message to standard error.
func_warning ()
{
$echo $progname${mode+: }$mode: warning: ${1+"$@"} 1>&2
}
# func_fatal_error arg...
# Echo program name prefixed message to standard error, and exit.
func_fatal_error ()
{
func_error ${1+"$@"}
exit $EXIT_FAILURE
}
# func_fatal_configuration arg...
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
func_error ${1+"$@"}
func_error "See the $PACKAGE documentation for more information."
func_fatal_error "Fatal configuration error."
}
# func_fatal_help arg...
# Echo program name prefixed message to standard error, followed by
# a help hint, and exit.
func_fatal_help ()
{
func_error ${1+"$@"}
func_fatal_error "$help"
}
# func_missing_arg argname
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
func_error "missing argument for $1"
exit_cmd=exit
}
# func_version
# Echo version message to standard output and exit.
func_version ()
{
$SED '/^# '$PROGRAM' (GNU /,/# warranty; / {
s/^# //; s/^# *$//;
s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/;
p;
}; d' < "$progpath"
exit $EXIT_SUCCESS
}
# func_usage
# Echo short help message to standard output and exit.
func_usage ()
{
$SED '/^# Usage:/,/# -h/ {
s/^# //; s/^# *$//;
s/\$progname/'$progname'/;
p;
}; d' < "$progpath"
echo
echo "run \`$progname --help | more' for full usage"
exit $EXIT_SUCCESS
}
# func_help
# Echo long help message to standard output and exit.
func_help ()
{
$SED '/^# Usage:/,/# Report bugs to/ {
s/^# //; s/^# *$//;
s:\$progname:'$progname':;
s:\$SHELL:'"$SHELL"':;
s:\$LTCC:'"$LTCC"':;
s:\$LD:'"$LD"':;
s/\$with_gnu_ld/'"$with_gnu_ld"'/;
s/\$automake_version/'"`automake --version 2>/dev/null |$SED 1q`"'/;
s/\$autoconf_version/'"`autoconf --version 2>/dev/null |$SED 1q`"'/;
p;
}; d' < "$progpath"
exit $EXIT_SUCCESS
}
# func_config
# Display the configuration for all the tags in this script.
func_config ()
{
re_begincf='^# ### BEGIN LIBTOOL'
re_endcf='^# ### END LIBTOOL'
# Default configuration.
$SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
# Now print the configurations for the tags.
for tagname in $taglist; do
$SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
done
exit $EXIT_SUCCESS
}
# func_features
# Display the features supported by this script.
func_features ()
{
$echo "host: $host"
if test "$build_libtool_libs" = yes; then
$echo "enable shared libraries"
else
$echo "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
$echo "enable static libraries"
else
$echo "disable static libraries"