Adding TLA Chains to LS2_v1 for Rate/Cost analysis
Tagging @dzanzi @khoo for review:
The following chains are added to LS2_v1:
DiJet TLA
Potential baselines:
HLT_j20_pf_ftf_PhysicsTLA_L1J100 HLT_j20_pf_ftf_preselj180_PhysicsTLA_L1J100 (baseline w/ presel) HLT_j20_pf_ftf_preselj140_PhysicsTLA_L1J100 (more aggressive, check CPU)
Chains to check CPU cost and storage: HLT_j0_pf_ftf_DJMASS200j20_PhysicsTLA_L150 and L1J100, with and without preselj180 HLT_j0_pf_ftf_DJMASS500j35_PhysicsTLA_L150 and L1J100, with and without preselj180
ISR photon + Jets
HLT_g35_loose_3j25_PhysicsTLA_L1EM22VHI (baseline EMTopo) HLT_g35_tight_3j25_PhysicsTLA_L1EM22VHI (baseline EMTopo, tight)
HLT_g35_loose_3j25_pf_ftf_PhysicsTLA_L1EM22VHI (baseline EMTopo) HLT_g35_tight_3j25_pf_ftf_PhysicsTLA_L1EM22VHI (baseline EMTopo, tight)
Multijet TLA
HLT_j60_pf_ftf_j45_pf_ftf_2j20_pf_ftf_PhysicsTLA_L1J45p0ETA21_3J15p0ETA25 (potential baseline with pflow)
HLT_j60_0eta290_020jvt_pf_ftf_j45_0eta290_020jvt_pf_ftf_2j20_0eta290_020jvt_pf_ftf_PhysicsTLA_L1J45p0ETA21_3J15p0ETA25 (potential baseline with pflow and eta cut + jvt)
BJet
As the bJet TLA implementation is still being perfected, the following chains do not yet have the PhysicsTLA tag.
#pflow multijet HLT_j60_pf_ftf_j45_pf_ftf_2j20_pf_ftf_boffperf_L1J45p0ETA21_3J15p0ETA25 HLT_4j20_pf_ftf_boffperf_L1J45p0ETA21_3J15p0ETA25 HLT_j20_pf_ftf_boffperf_L1HT190-J15s5pETA21
#pflow di-bjet HLT_j20_pf_ftf_boffperf_L1J100 HLT_j20_pf_ftfboffperf_L1J50_DETA20-J50J
Chains that we failed to add to the menu because of errors/inconsistencies/misconception in the chain name:
HLT_j180_pf_ftf_j20_pf_ftf_SHARED_preselj180_PhysicsTLA_L1J00
HLT_g35_loose/tight_3j25_pf_ftf_presel2j25_PhysicsTLA_L1J00 (it looks like calo presel is not supported in combined chains?)
HLT_g35_loose/tight_3j25_pf_ftf_j0_DJMASS100j25_PhysicsTLA_L1J00
Did not actually test this, but it would seem that the diJet hypo scenario can only check the invariant mass condition between the leading and subheading jets, which in this case would imply that the photon would enter the mjj calculation in place of a legitimate jet a good amount of the time. Is this assessment correct?
Thanks,
The Run 3 TLA developers group [@cantel @tberry @doglioni @mmontell @fpastore]