add README from #1bc34b53 as README_FLASHPRO

ipmc-config/README_FLASHPRO.md

+# CERN-IPMC Binaries
+
+This folder contains the binaries to configure the CERN-IPMC module as required for an automatic test.
+
+Only the Software part changes from the nominal module's configuration.
+Therefore, when the module's FPGA is already configured, it can be flashed using IPMITOOL as described into the CERN-IPMC documentation.
+
+Otherwise, the procedure to follow is described below (should concern new modules only - or FPGA configuration upgrade).
+
+# Dependencies
+
+List of dependency(ies): 
+- <b>FlashPRO</b>: https://www.microsemi.com/product-directory/programming/4977-flashpro#software
+
+# How to
+
+- Open FlashPro and create a new project
+
+<img src="http://ep-ese-xtca.web.cern.ch/IPMC/img/flashpro_new_project.png" />
+
+- Open Configure device
+
+<img src="http://ep-ese-xtca.web.cern.ch/IPMC/img/flashpro_configure_device.png" />
+
+- Browse PDB file and select ipmc-tester\IPMCBinaries\Images\A2F200-ATCA.pdb
+
+<img src="http://ep-ese-xtca.web.cern.ch/IPMC/img/flashpro_browse_pdb.png" />
+
+- Click on modify and import the following files:
+    - FPGA Array: ipmc-tester\IPMCBinaries\Images\A2F200-ATCA.pdb
+    - FlashROM: ipmc-tester\IPMCBinaries\Images\MSS_UFROM_0.ufc
+    - eNVM: ipmc-tester\IPMCBinaries\Images\MSS_ENVM_0.efc
+    
+<img src="http://ep-ese-xtca.web.cern.ch/IPMC/img/flashpro_modify_pdb.png" />
+
+- Modify the FlashROM:
+
+<img src="http://ep-ese-xtca.web.cern.ch/IPMC/img/flashpro_modify_flashrom.png" />
+
+- Modify the eNVM:
+    - Import content: ipmc-tester\IPMCBinaries\Images\nvm.ihx
+    
+<img src="http://ep-ese-xtca.web.cern.ch/IPMC/img/flashpro_modify_envm.png" />
+
+And then, click Program (ensure that your FlashPRO cable is well connected to the IPMC_JTAG1 connector)