WIP: HNL new lines valukash RD
This is a set of the new lines for the B+/B+_c->eN(->mupi) and B+/B+_c->muN(->epi), where N is a heavy neturino.
Lines are meant to go to the dst and one of the lines StrippingBeauty2MajoMuDD does not pass the rate at the moment (this is WIP).
The rates and timings on 50000 events are:
StrippingReport INFO Event 50000, Good event 50000
| *Decision name*|*Rate,%*|*Accepted*| *Mult*|*ms/evt*|
|_StrippingGlobal_ | 0.7040| 352| | 13.368|
|_StrippingSequenceStreamBhadronCompleteEvent_ | 0.7040| 352| | 13.356|
|!StrippingBeauty2MajoMuDDLinePrescale | 0.0400| 20| 2.000| 0.327|
|!StrippingBeauty2MajoMuLLLinePrescale | 0.0200| 10| 2.100| 0.842|
|!StrippingBeauty2MajoEDDLinePrescale | 0.0420| 21| 1.143| 0.773|
|!StrippingBeauty2MajoELLLinePrescale | 0.0440| 22| 1.364| 0.404|
|!StrippingBeauty2MajoMuDDLine | 0.2320| 116| 1.328| 5.697|
|!StrippingBeauty2MajoMuLLLine | 0.0380| 19| 1.263| 1.594|
|!StrippingBeauty2MajoEDDLine | 0.0320| 16| 1.062| 0.872|
|!StrippingBeauty2MajoELLLine | 0.0280| 14| 1.000| 0.246|
|!StrippingBu2KsPiPiDDLine | 0.0480| 24| 1.125| 0.154|
|!StrippingBu2KsPiPiLLLine | 0.0660| 33| 1.000| 0.115|
|!StrippingBu2piD02KpiLine | 0.0300| 15| 1.000| 0.630|
|!StrippingBu2JpsiKplusmumuLine | 0.0080| 4| 1.000| 0.096|
|!StrippingBu2JpsiKpluseeLine | 0.0100| 5| 1.200| 0.085|
|!StrippingBeauty2MajoMuDDLinePrescale_TIMING | 0.0540| 27| 2.519| 0.039|
|!StrippingBeauty2MajoMuLLLinePrescale_TIMING | 0.0200| 10| 1.900| 0.042|
|!StrippingBeauty2MajoEDDLinePrescale_TIMING | 0.0380| 19| 1.211| 0.023|
|!StrippingBeauty2MajoELLLinePrescale_TIMING | 0.0460| 23| 1.304| 0.025|
|!StrippingBeauty2MajoMuDDLine_TIMING | 0.2320| 116| 1.328| 0.050|
|!StrippingBeauty2MajoMuLLLine_TIMING | 0.0380| 19| 1.263| 0.041|
|!StrippingBeauty2MajoEDDLine_TIMING | 0.0320| 16| 1.062| 0.040|
|!StrippingBeauty2MajoELLLine_TIMING | 0.0280| 14| 1.000| 0.053|
|!StrippingBu2KsPiPiDDLine_TIMING | 0.0480| 24| 1.125| 0.045|
|!StrippingBu2KsPiPiLLLine_TIMING | 0.0660| 33| 1.000| 0.037|
|!StrippingBu2piD02KpiLine_TIMING | 0.0300| 15| 1.000| 0.034|
|!StrippingBu2JpsiKplusmumuLine_TIMING | 0.0080| 4| 1.000| 0.033|
|!StrippingBu2JpsiKpluseeLine_TIMING | 0.0100| 5| 1.200| 0.027|@sferrere and @iwilliam notifying you that the module is entirely new so the default_config has to be added to the line config in StrippingSettings. Thank you for your help!