ATLASRECTS-3820

This MR raises the pT threshold for ID TrackParticles from 400 to 500 MeV, by means of the cutLevel in InDetJobProperties (13->14). This is one of the changes agreed by the AOD reduction task force. The change takes effect in the BS->ESD step and is therefore NOT using thinning - the objects never get built.


Former-commit-id: 8347647d2bddab9bfc38d5dee291c3f7156c1729

2016-01-25 Alex Alonso
	* Fix for TrkAmbiguityProcessor after latest changes.
	* Tagging as: InDetRecExample-03-01-05-05

2016-01-23 Alex Alonso
	* Add new config flags to use different various track fitter until one creates valid
	covariance matrices. See ATLASRECTS-3555
        * Migrate the Rel 20.7 changes for low Pt to rel 21. Requires
	TrkAmbiguityProcessor-01-00-14-02
	* Tagging as: InDetRecExample-03-01-05-04

2016-01-10 Goetz Gaycken
	* Reverted removal of cut level 13, but now cut level 13
	  will only activate calo seed TRT segment finding if the
	  calorimeter is available.
2016-12-16 Alex Alonso
	* OBO Alex Kastanas. Fix the configuration for Global Monitoring
	accordligy to new tag: InDetGlobalMonitoring-00-10-01
	* Tagging as InDetRecExample-03-01-04
	* Tagging as InDetRecExample-03-01-03
...
(Long ChangeLog diff - truncated)


Former-commit-id: bcf7817f96639bfc9eeabfa28aa9c0b86c507f3f

	* Added cut level 14 increasing the pt threshold to 500 MeV.


Former-commit-id: 551370672b8ff8ca4c80383fc07fdae53e9ed8d9

By default inner detector tracks are not written to the ESD
unless explicitly requested or if xAOD track particles are not
created. This is to keep the ESD size small despite track slimming
being now off by default. (InDetRecExample-02-06-08-04)

	* Do not write tracks to ESDs by default (ATLASRECTS-3538).


Former-commit-id: 419314e6

	* Changes to get TRT hits in InDetPixelPrdAssociationTrackParticles
	* https://its.cern.ch/jira/browse/ATLASRECTS-3188
	* Tagging as InDetRecExample-02-06-08

2016-06-03 Alex Alonso
	* Turn OFF slimming by default.
	* https://its.cern.ch/jira/browse/ATLASRECTS-2726
	* Tagging as InDetRecExample-02-06-07

2016-05-26 Alex Alonso
	* Add a new flag: doStoreTrackSeeds, to store the Si seeds in a new
	track collection.
	* Tagging as InDetRecExample-02-06-06

2016-05-12 Stewart Martin-Haugh
	* Pre-exec setting up data dependencies needed in AthenaMT
	* Tagging as InDetRecExample-02-06-05


Former-commit-id: fea4a670fae02cfb25ff5a8eec3cf55af477fc52

This addresses part of ATLASRECTS-2838. (InDetRecExample-02-06-04)

	* Adding in configurations for InDetFlags.doTIDE_RescalePixelCovariances
	* Tagging as InDetRecExample-02-06-02

2016-04-29 Goetz Gaycken (obo Anthony Morley)
	* Allow for more shared SCT clusters (ATLASRECTS-2774).

2016-04-25 Goetz Gaycken (obo Oleg Bulekov)
	* Configuration for updated TRT dEdx computation (partially addresses
	  ATLASRECTS-2838).

2016-04-12 Roland Jansky
	* Modifying to run default ambiguity solver & processor for SLHC
	* Tagging as InDetRecExample-02-06-01

2016-04-12 Matthias Danninger
	* Adding new bool 'useDynamicAlignFolders' to make new alignment folder scheme configurable
	* Tagging as InDetRecExample-02-06-00

2016-04-08  John Chapman
	* share/InDetRecCabling.py - Fix for PixelCabling for Run1
...
(Long ChangeLog diff - truncated)


Former-commit-id: 013d4c3d

* Increase minimum track pt cut for TRT plots.
* disabling the trigger aware monitoring tools in ID alignment
  monitoring to reduce memory usage.
* running the ID global error monitoring online.
* Temporary hack to turn off the TRT extensions for HI. (InDetRecExample-02-05-94-03)

2016-04-19 Goetz Gaycken (obo Emre Celebi et al.)
	* Increase minimum track pt cut for TRT plots.

2016-04-19 Goetz Gaycken (obo Alex Kastanas)
	* disabling the trigger aware monitoring tools in ID alignment
	  monitoring to reduce memory usage.

2016-04-18 Goetz Gaycken (obo Alex Kastanas)
	* running the ID global error monitoring online.

2016-04-13 Matthias Danninger
	* Adding useDynamicAlignFolders to InDetFlags
	* Tagged as InDetRecExample-02-05-94-02 (also included in InDetRecExample-02-06-00) for r21

2016-03-04 Goetz Gaycken
	* Fix TRT conditions folders for online.
	* Tagged as InDetRecExample-02-05-94

2016-03-23 Magda Chelstowska <magdac@cern.ch>
	* Fix for PixelCabling for Run1 digitization
...
(Long ChangeLog diff - truncated)

	* Fix syntax error in InDetJobProperties.py#L2652
	* Tag  InDetRecExample-02-05-87

2015-12-18 Goetz Gaycken (obo Nick Barlow)
	*  Fix monitoring ATN.

2015-12-18 Goetz Gaycken
	* Allow to express parameters of xAOD TrackParticles wrt. the first primary
	  vertex. This addresses ATLIDTRKCP-64. Requires InDetPriVxFinder-03-00-15.
	  (Port from InDetRecExample-02-05-64-11).

2015-12-15 Goetz Gaycken (obo Alex Kastanas)
	* Adjusted binning of track numbers in global monitoring.

2015-12-09 Goetz Gaycken (obo Alex Kastanas)
	* Configure track selection tools used in the indet global monitoring.

2015-12-08 Goetz Gaycken (obo Jordi Duarte-Campderros)
	* Do not use TRT phase for TRT extension in large d0 tracking.

...
(Long ChangeLog diff - truncated)

- renamed TRTOccupancyEventInfo to doTRTGlobalOccupancy
- do not encorce COOL vector payload. Which payload to use is chosen
  depending on the input file. (InDetRecExample-02-05-80)

	* renamed TRTOccupancyEventInfo to doTRTGlobalOccupancy

2015-11-04 Goetz Gaycken (obo Nick Barlow)
	* Use cool vector payload except for run1 or if forced.

2015-11-03 Alex Alonso
	* Fix TRT wrong parameters for cutlevel 3 in HI
	* Tagged as InDetRecExample-02-05-64-10

2015-11-03 Alex Alonso
	* Add new cut for HI. minPt 300 MeV if InDetFlags.cutLevel == 3
	* Tagged as InDetRecExample-02-05-64-09

2015-11-05 Goetz Gaycken (obo Jordi Duarte-Campderros)
	* Fixed typo in large-d0 property class definitions.

2015-11-02 Goetz Gaycken (obo Jordi Duarte-Campderros, Siinn Che)
	* ported large-d0 re-tracking configuration to the trunk
	* fix for the problem regarding PixelClusNNCalib in DVRetracking

...
(Long ChangeLog diff - truncated)

       	*  Create ForceCoolVectorPayload flag
	* IBO of Nick Barlow,ATLASRECTS-2491
	* Tagged as InDetRecExample-02-05-73

2015-10-02 Goetz Gaycken
       *  Use TRT_dEdxTool in TrackSummary after ambiguity solution
          ATLASRECTS-2045.
	* Tagged as InDetRecExample-02-05-72

2015-09-29 Alex Alonso
        * Improvement of photon conversion reconstruction: ATLASRECTS-2458
	* Tagged as InDetRecExample-02-05-71

2015-09-29 Alex Alonso
        * DB for new erros: ATLASRECTS-2201
        * DB overrides used. Need to be fixed
	* Tagged as InDetRecExample-02-05-70

...
(Long ChangeLog diff - truncated)

	* Changing setup of defaults so that InDet25nsec flag is set according to jobproperties.Beam.bunchSpacing
	* Tagged as InDetRecExample-02-05-64

2015-07-28 Goetz Gaycken ibo Mike Hance
	* special tracking setup for the calibration_BeamSpot reconstruction
	  at Tier-0.

2015-07-21 Goetz Gaycken
	* do not use beam constraint if doExpressProcessing is set
	  (see ATLASRECTS-2285).

2015-07-18 Shaun Roe
	* correct indentation in InDetRecConditionsAccess
	* Tagged as InDetRecExample-02-05-61

2015-07-16 Shaun Roe
	* Add option to force Cool Vector payload in conditions and cabling access for SCT
	* Tagged as InDetRecExample-02-05-60

  * Add Multiplicity cut for iterative vertexing when no beam constraint (avoid timeouts)
  * Tagged as InDetRecExample-02-05-59

2015-06-18 Nick Styles
  * Update doCosmics set-up to match what was run for cosmics in preExecs
  * Tagged as InDetRecExample-02-05-58

2015-06-17 Dave Casper
  * Add configuration of vertex imaging seeder via InDetFlags.primaryVertexSetup = 'MedImgMultiFinding'
    (requires TrkVertexSeedFinderUtils-01-00-04+ and TrkVertexSeedFinderTools-02-00-06+)
  * Make output files from ReadInDet_jobOptions re-tracking xAOD-compatible
  * DBM tracking changes by M. Diamond
  * Tagged as InDetRecExample-02-05-57

2015-05-28 Nick Styles
	* Updates to Alignment Monitoring Track Selections (obo A. Kastanas and P. Butti)
	* Tagged as InDetRecExample-02-05-56

  * Update VtxLumi cuts and settings
  * Tagged as InDetRecExample-02-05-55

2015-04-21 Nick Styles
  * Fix Monitoring verbosity
  * Tagged as InDetRecExample-02-05-54

2015-04-20 Nick Styles
  * Add option to use SCT Module Veto Service
  * Tagged as InDetRecExample-02-05-53

2015-04-16 Nick Styles
  * Turn off SG Deletion for VtxLumi
  * Tagged as InDetRecExample-02-05-52

2015-03-27 Roland Jansky
  * Modified JobProperties to never run TRTPhaseCalculation if pseudo tracking is on and newtracking off.

2015-03-20 Alex Kastanas
  * Support for updated InDetMonitoringGlobal.
...
(Long ChangeLog diff - truncated)

  * Correct beginner's mistake in Python statements of previous tag.
  * JIRA ATLIDTRKCP-22 and ATLASRECTS-1860
  * Tagged as InDetRecExample-02-05-48.

2015-03-17 Frederick Luehring
  * Change TRT validity gate to match convention that a 18 ns calibrated drift
  * time is a 1 mm drift distance. Set gate the same for data and simulation.
  * Correct oversight of not applying  validity gate to straws using Ar gas
  * mixture by setting Ar gate parameters to the Xe mixture ones.
  * All changes are in ConfiguredInDetPreProcessingTRT.py and are cacheable.
  * JIRA ATLIDTRKCP-22 and ATLASRECTS-1860
  * Tagged as InDetRecExample-02-05-47

2015-03-12 Nick Styles
  * Add option to keep First/Last hit on TrackParticle
  * Changes for V0 finding from E. Bouhova-Thacker
  * Tagged as InDetRecExample-02-05-46

2015-03-09  Nick Styles
  * Re-enable Pixel Monitoring hole search
...
(Long ChangeLog diff - truncated)

  * Vertex EDM conversion for fast fitting added (ATLASRECTS-1313)
  * Tagged as InDetRecExample-02-05-38 (-39 to fix typo introduced...)

2015-02-25  Nick Styles
  * No PRD-associated pixel tracklets for ITK
  * Tagged as InDetRecExample-02-05-37

2015-02-24  Nick Styles
  * Changing settings for ITK forward tracking, so that they will be added to merged collection, and vertexing will run on them.
  * Fix for re-running pattern from ESD (ATLASRECTS-1696)
  * Tagged as InDetRecExample-02-05-36

2015-02-20 Nick Styles
  * Storegate deletion false for Heavy Ion (ATLASRECTS-1313)
  * Tagged as InDetRecExample-02-05-35

2015-02-18 Nick Styles
  * Loosen Forward track pT cut for ITK
  * Tagged as InDetRecExample-02-05-34

...
(Long ChangeLog diff - truncated)

  * Use occupancy in TRT PID calculation
  * Tagged as InDetRecExample-02-05-32

2015-02-12 Nick styles
  * Add new options for SiTrackMaker to allow SCT/Pixel only
  * Fix for Heavy Ion settings
  *InDetRecExample-02-05-31

2015-02-11 Nick Styles
  * Add options to auto-detect correct pixel cabling
  * Tagged as  InDetRecExample-02-05-30

2015-02-09 Nick Styles
  * Fix for TRT occupancy alg name
  * Remove duplicater container names
  * Tagged as InDetRecExample-02-05-29

2015-02-06 Nick Styles
  * Add flag to allow TRT Occupancy Alg to be switched off for stand-alone ID running
  * Tagged as InDetRecExample-02-05-28
...
(Long ChangeLog diff - truncated)

  * Schedule TRT Ocupancy Alg
  * InDetRecExample-02-05-26

2015-01-20 Nick Styles
  * Fix to commissioning setting (don't do PRD-associated pxiel tracklets, since unassociated tracklets run anyway)
  * InDetRecExample-02-05-25

2015-01-18 Nick Styles
  * Reintegrate Very-forward tracking for ITK
  * Tagged as InDetRecExample-02-05-24

2015-01-18 Nick Styles
  * Switch on PRD-associated Pixel tracklets
  * Tagged as InDetRecExample-02-05-23

  * ATN fixes
  * Tagged asInDetRecExample-02-05-22

2015-01-08 Nick Styles
  * No TIDE for Pixel Tracklets w/ PRD association
  * Tagged as InDetRecExample-02-05-21

2014-12-22 Nick Styles
  * Turn off calo cell association for ATN test options
  * Tighten pixel tracklets cuts to 4 hits, no holes (for those run on remaining PRDs after New Tracking)
  * Only update necessary TrackSummary info during collection merger
  * Tagged as InDetRecExample-02-05-20

2014-12-18 Niels van Eldik
  * share/WriteInDetESD.py: update exclusion list
  * Tagged as InDetRecExample-02-05-19

2014-12-17 Nick Styles
  * TIDE switched off for SLHC
  * Tagged as InDetRecExample-02-05-18
...
(Long ChangeLog diff - truncated)