Merge branch 'rmatev-LHCBPS-1440' into '2016-patches'

Fix some tests and remove others

- Fix test failures due to CondDB and other minor issues
- Create test TCKs in a platform specific directory
- Fix (somehow) tests for rerunning on stripping 20
- Update reference for hlt2prcheck and improve reproducibility
- Remove the tistos test, track decoding tests, and the hlt1only and hlt2only tests
- Remove unused test options
- Improve .gitignore

See merge request !54

.gitignore

@@ -14,6 +14,7 @@ CTestTestfile.cmake
 CPackSourceConfig.cmake
 CPackConfig.cmake
 cmake_install.cmake
+/toolchain.cmake
 
 # common byproducts
 *.pyc
@@ -41,7 +42,6 @@ setup.*
 cleanup.*
 version.cmt
 genConf/
-QMTest/
 test_results/
 *-slc[56]-*/
 i686-winxp-vc9-dbg/

Hlt/HltCache/options/Physics_pp_Draft2016.py

@@ -12,7 +12,7 @@ Moore().CheckOdin = False
 Moore().Simulation = False
 Moore().ForceSingleL0Configuration = True
 Moore().SkipEvents = 0
-Moore().CondDBtag = 'cond-20160522'
+Moore().CondDBtag = 'cond-20161011'
 Moore().DDDBtag = 'dddb-20150724'
 
 from Configurables import EventSelector

Hlt/Moore/tests/options/AddPrCheckerHlt2.py

@@ -19,17 +19,20 @@ def myActionHlt2() :
     PrChecker2("PrCheckerHlt2").TriggerNumbers = True
     PrChecker2("PrCheckerHlt2").Eta25Cut = True
     PrChecker2("PrCheckerHlt2").WriteForwardHistos = 1
+    PrChecker2("PrCheckerHlt2").WriteTexOutput = True  # workaround for unitialized values...
 
     PrChecker2("PrCheckerHlt2Forward").TriggerNumbers = True
     PrChecker2("PrCheckerHlt2Forward").Eta25Cut = True
     PrChecker2("PrCheckerHlt2Forward").WriteForwardHistos = 1
     PrChecker2("PrCheckerHlt2Forward").ForwardTracks = Hlt2TrackLoc["ComplementForward"]
+    PrChecker2("PrCheckerHlt2Forward").WriteTexOutput = True  # workaround for unitialized values...
     #(N.B.: container base for velo tracks was renamed to Hlt1)
     # Figure out which HLT is run from HltConf
     PrChecker2("PrCheckerHlt2").SeedTracks = Hlt2TrackLoc["Seeding"]
     PrChecker2("PrCheckerHlt2").MatchTracks = Hlt2TrackLoc["Match"]
     PrChecker2("PrCheckerHlt2").DownTracks = Hlt2TrackLoc["Downstream"]
     PrChecker2("PrCheckerHlt2").ForwardTracks = Hlt2TrackLoc["Forward"]
+    PrChecker2("PrCheckerHlt2").WriteTexOutput = True  # workaround for unitialized values...
 
     from HltTracking.Hlt2TrackingConfigurations import Hlt2BiKalmanFittedForwardTracking
     from HltTracking.Hlt2TrackingConfigurations import Hlt2BiKalmanFittedDownstreamTracking
@@ -38,6 +41,7 @@ def myActionHlt2() :
     PrChecker2("PrCheckerHlt2").BestTracks = tracks.outputSelection()
     PrChecker2("PrCheckerHlt2Down").BestTracks = tracksDown.outputSelection()
     #PrChecker2("PrCheckerHlt2").DownTracks = tracksDown.outputSelection()
+    PrChecker2("PrCheckerHlt2Down").WriteTexOutput = True  # workaround for unitialized values...
 
     PrTrackAssociator("AssocAllHlt2").RootOfContainers = Hlt2TrackRoot
     PrTrackAssociator("AssocFittedHlt2").RootOfContainers = Hlt2TrackRoot+HltDefaultFitSuffix

Hlt/Moore/tests/options/Moore-LocalTCKData.py

-from Configurables import Moore;
-Moore().TCKData='../../../../InstallArea/$CMTCONFIG'

Hlt/Moore/tests/options/Moore_2016draft.py

-from Gaudi.Configuration import *
+from Gaudi.Configuration import INFO
 
-from Configurables import Moore
+from Configurables import Moore, CondDB
 Moore().ThresholdSettings = "Physics_pp_Draft2016"
 Moore().UseTCK = False
 Moore().ForceSingleL0Configuration = False
 Moore().Split = ''
 Moore().EnableTimer = True
 Moore().OutputLevel = INFO
+CondDB().LatestGlobalTagByDataType = Moore().getProp('DataType')
 
 from Configurables import LHCbTimingAuditor, LHCbSequencerTimerTool
 LHCbTimingAuditor("TIMING").addTool(LHCbSequencerTimerTool, "TIMING")
-#normalize the timing table in tests
+# normalize the timing table in tests
 LHCbTimingAuditor("TIMING").TIMING.Normalised = True
 
 from PRConfig import TestFileDB
 TestFileDB.test_file_db["2016NB_25ns_L0Filt0x1609"].run(configurable=Moore())
 Moore().RemoveInputHltRawBanks = True
-from Configurables import DDDBConf
-DDDBConf().InitialTime = 'Safe'
-# the following overides the L0TCK in the ThresholdSettings                                                          
+# the following overides the L0TCK in the ThresholdSettings
 from Configurables import HltConf
-HltConf().setProp("L0TCK",'0x1609')
+HltConf().setProp("L0TCK", '0x1609')
 
 Moore().EvtMax = 100
 

Hlt/Moore/tests/options/Moore_2016pHe.py

-from Gaudi.Configuration import *
+from Gaudi.Configuration import INFO
 
-from Configurables import Moore
+from Configurables import Moore, CondDB
 Moore().ThresholdSettings = "protonHelium_pPb_2016"
 Moore().UseTCK = False
 Moore().ForceSingleL0Configuration = False
 Moore().Split = ''
 Moore().EnableTimer = True
 Moore().OutputLevel = INFO
+CondDB().LatestGlobalTagByDataType = Moore().getProp('DataType')
+
+from Configurables import LHCbTimingAuditor, LHCbSequencerTimerTool
+LHCbTimingAuditor("TIMING").addTool(LHCbSequencerTimerTool, "TIMING")
+# normalize the timing table in tests
+LHCbTimingAuditor("TIMING").TIMING.Normalised = True
 
 # from PRConfig import TestFileDB
 # TestFileDB.test_file_db["2016NB_25ns_L0Filt0x1609"].run(configurable=Moore())
@@ -17,8 +23,6 @@ IOExtension().inputFiles([
 ])
 
 Moore().RemoveInputHltRawBanks = True
-from Configurables import DDDBConf
-DDDBConf().InitialTime = 'Safe'
 
 Moore().EvtMax = 1000
 

Hlt/Moore/tests/options/Moore_RateTest_MC_RedoL0.py

-# Purpose:
-# Re-run L0 on a juggled signal MC sample
-# The output file will be used to check the efficiency function
-# of Moore_RateTest.py in PRConfig
-
-from Gaudi.Configuration import *
-from Configurables import L0App
-L0App().TCK = '0x1600'
-L0App().ReplaceL0Banks = True
-L0App().EvtMax = 100
-from Configurables import CondDB
-
-from PRConfig import TestFileDB
-TestFileDB.test_file_db['Juggled_MC_2015_27163003_DstToD0pip_D0ToKmPip'].run(configurable=L0App())
-
-
-from Configurables import HltRoutingBitsFilter
-rb_filter = HltRoutingBitsFilter( "RoutingBitsFilter" )
-rb_filter.RequireMask = [0x0, 0x4, 0x0]
-
-from Configurables import bankKiller
-hlt_banks = [ 'HltDecReports','HltRoutingBits','HltSelReports','HltVertexReports','HltLumiSummary','HltTrackReports' ]
-killer = bankKiller( 'RemoveInputHltRawBanks',  BankTypes = hlt_banks )
-
-ApplicationMgr().TopAlg = [rb_filter, killer]
-
-from Configurables import EventSelector
-EventSelector().PrintFreq = 10
-
-from Configurables import L0DUFromRawAlg
-l0du_alg = L0DUFromRawAlg()
-
-from Configurables import L0DUReportMonitor
-l0du_mon = L0DUReportMonitor()
-
-from Configurables import LoKiSvc
-LoKiSvc().Welcome = False
-from Configurables import LoKi__L0Filter
-l0_filter = LoKi__L0Filter('L0Filter', Code = "L0_DECISION_PHYSICS")
-
-from GaudiConf import IOHelper
-from Configurables import InputCopyStream
-input_copy = IOHelper().outputAlgs('rerunL0.dst', InputCopyStream('CopyStream'), writeFSR = False)[0]
-
-from Configurables import GaudiSequencer
-from Gaudi.Configuration import ApplicationMgr
-writer_seq = GaudiSequencer('WriterSeq')
-writer_seq.Members = [l0du_alg, l0du_mon, l0_filter, input_copy]
-ApplicationMgr().OutStream = [writer_seq]
-

Hlt/Moore/tests/options/TCK/CreateTCKEntry.py

@@ -22,20 +22,20 @@ def id_from_log(filename):
     raise RuntimeError('File {} does not look like TCK creation output!'.format(filename))
 
 
-def tck_from_options(filename, key):
+def settings_from_options(filename):
     g = {}
     execfile(filename, g)
-    tck = g['settings'][key]
     # a hack to remove any configurable instances coming from the options file
     from GaudiKernel.Configurable import Configurable
     Configurable.allConfigurables = {}
-    return tck
+    return g['settings']
 
 
 parser = argparse.ArgumentParser()
 parser.add_argument("id", help='Top level configuration id or TCK creation log.')
 parser.add_argument("tck", help='TCK (e.g. 0x12345678) or key in options (e.g. Hlt1TCK).')
-parser.add_argument("--options", help='Options where Hlt1TCK/Hlt2TCK is defined.')
+parser.add_argument("--tckdata", default='TCKData', help='Directory containing the config.cdb file.')
+parser.add_argument("--options", help='Options where Hlt1TCK/Hlt2TCK and TCKData are defined.')
 args = parser.parse_args()
 
 
@@ -47,8 +47,10 @@ if not (len(args.id) == 32 and is_hex(args.id)):
 if not is_hex(args.tck):
     if not args.options:
         parser.error('--options is required when TCK is not given directly')
-    args.tck = tck_from_options(args.options, args.tck)
+    settings = settings_from_options(args.options)
+    args.tck = settings[args.tck]
+    args.tckdata = settings['TCKData']
 
-
-cas_rw = ConfigAccessSvc(Mode='ReadWrite', File='TCKData/config.cdb')
+configdb = os.path.join(os.path.expandvars(args.tckdata), 'config.cdb')
+cas_rw = ConfigAccessSvc(Mode='ReadWrite', File=configdb)
 createTCKEntries({args.tck: args.id}, cas=cas_rw)

Hlt/Moore/tests/options/TCK/TCKOptions.py

@@ -9,6 +9,8 @@ The script CreateTCK1.py contains the absolute minimum configuration for that st
 # !!! Check that these settings are what we want for these TCKs !!! #
 settings = {
     # Modify these as approppriate for the new TCKs:
+    "TCKData": "../../../../InstallArea/$CMTCONFIG",
+    # "TCKData": "TCKData",
     "L0TCK": "0x160B",
     "Hlt1TCK": "0x1001160B",
     "Hlt2TCK": "0x2001160B",
@@ -18,7 +20,7 @@ settings = {
     # Check if these need to be updated:
     "ThresholdSettings": "Physics_pp_Draft2016",
     "DDDBtag": "dddb-20150724",
-    "CondDBtag": "cond-20160522",
+    "CondDBtag": "cond-20161011",
 }
 
 
@@ -41,7 +43,7 @@ if 'Moore' in allConfigurables:  # For the Create/Test TCK steps
         Moore().RemoveInputHltRawBanks = True
 
     # Specify the location for our local config.cdb file
-    TCKData_DEST = 'TCKData'
+    TCKData_DEST = os.path.expandvars(settings['TCKData'])
     Moore().TCKData = TCKData_DEST
     if not os.path.exists(TCKData_DEST):
         os.makedirs(TCKData_DEST)

Hlt/Moore/tests/options/TCK/TCKOptionsZeroEvents.py

@@ -9,6 +9,8 @@ The script CreateTCK1.py contains the absolute minimum configuration for that st
 # !!! Check that these settings are what we want for these TCKs !!! #
 settings = {
     # Modify these as approppriate for the new TCKs:
+    "TCKData": "../../../../InstallArea/$CMTCONFIG",
+    # "TCKData": "TCKData",
     "L0TCK": "0x160B",
     "Hlt1TCK": "0x1002160B",
     "Hlt2TCK": "0x2002160B",
@@ -18,7 +20,7 @@ settings = {
     # Check if these need to be updated:
     "ThresholdSettings": "Physics_pp_Draft2016",
     "DDDBtag": "dddb-20150724",
-    "CondDBtag": "cond-20160522",
+    "CondDBtag": "cond-20161011",
 }
 
 
@@ -41,7 +43,7 @@ if 'Moore' in allConfigurables:  # For the Create/Test TCK steps
         Moore().RemoveInputHltRawBanks = True
 
     # Specify the location for our local config.cdb file
-    TCKData_DEST = 'TCKData'
+    TCKData_DEST = os.path.expandvars(settings['TCKData'])
     Moore().TCKData = TCKData_DEST
     if not os.path.exists(TCKData_DEST):
         os.makedirs(TCKData_DEST)

Hlt/Moore/tests/options/TCK/diff.py

@@ -5,9 +5,9 @@ parser = argparse.ArgumentParser()
 parser.add_argument("--split", help='split level (Hlt1 or Hlt2).')
 args = parser.parse_args()
 
-cas_rw = ConfigAccessSvc(Mode='ReadWrite', File='TCKData/config.cdb')
+cas = ConfigAccessSvc(File='../../../../InstallArea/$CMTCONFIG/config.cdb')
 
-configurations = getConfigurations(cas=cas_rw)
+configurations = getConfigurations(cas=cas)
 
 TCKs = []
 for k,v in configurations.iteritems():
@@ -22,7 +22,7 @@ print TCKs
 if len(TCKs) != 2:
     raise RuntimeError('Found %s (require 2) %s TCKs in the config.cdb ' %(len(TCKs),args.split))
 print 'diff the first two'
-diff(TCKs[0],TCKs[1],cas=cas_rw)
+diff(TCKs[0], TCKs[1], cas=cas)
 
 #import sys
 #sys.exit(0)

Hlt/Moore/tests/options/hlt2_trackingonly-threshold.py

-from Configurables import Moore, HltConf
-
-HltConf().ThresholdSettings="Hlt2_TrackingOnly"
-Moore().UseTCK = False
-
-# HLT1 might have been run with a TCK so lets look into the local one
-from Configurables import ConfigCDBAccessSvc
-ConfigCDBAccessSvc().File='config.cdb'
-Moore().TCKData = '$MOOREROOT/tests/options/TCKData/'
-Moore().InitialTCK = '0x50000001'
-Moore().CheckOdin=False

Hlt/Moore/tests/options/readStrip20Data.py

@@ -42,5 +42,14 @@ appendPostConfigAction(d.witnessTheFirepowerOfThisFullyArmedAndOperationalBattle
 from Configurables import RecombineRawEvent
 RecombineRawEvent()
 
+from Configurables import HltOutputConf
+HltOutputConf().EnableLumiEventWriting = False
+# Moore().RemoveInputHltRawBanks = True
 
+Moore().EnableTimer = True
+Moore().OutputLevel = INFO
 
+from Configurables import LHCbTimingAuditor, LHCbSequencerTimerTool
+LHCbTimingAuditor("TIMING").addTool(LHCbSequencerTimerTool, "TIMING")
+# normalize the timing table in tests
+LHCbTimingAuditor("TIMING").TIMING.Normalised = True

Hlt/Moore/tests/options/rescaleNBLines.py

-#When running from the real data for my tests, I need to scale down the prescale lines usign a transform, otherwise I simple select everything again.
-#I need to do this when running, but not when generating a TCK!
-
-#accessing this property is done via TCKSh:
-# python
-# from TCKUtils.utils import *
-# ctas=ctas(File='../../../../InstallArea/x86_64-slc6-gcc48-opt/config.tar')
-# getProperty(0x00ee0046,"Hlt1MBNoBiasPostScaler","AcceptFraction",ctas)
-# 
-from Gaudi.Configuration import *
-def resetAction(mult=0.1):
-    from Configurables import DeterministicPrescaler as dp
-    dp("Hlt1MBNoBiasPreScaler").AcceptFraction=mult*mult
-    dp("Hlt1CharmCalibrationNoBiasPreScaler").AcceptFraction=mult
-    dp("Hlt2TransparentPreScaler").AcceptFraction=0.0
-    
-
-def resetTransform(mult=0.1):
-    """
-    Gah, can't guess what the original number is...
-    """
-    from Moore import Funcs
-    trans={}
-    trans[".*Hlt1CharmCalibrationNoBiasPreScaler"]={"AcceptFraction": {"^.*$":str(mult)}}
-    trans[".*Hlt1MBNoBiasPreScaler"]={"AcceptFraction": {"^.*$":str(mult*mult)}}
-    trans[".*Hlt2TransparentPreScaler"]={"AcceptFraction": {"^.*$":str(0.0)}}
-    Funcs._mergeTransform(trans)
-    
-from Configurables import Moore
-if Moore().getProp("generateConfig"):
-    pass
-else:
-    if Moore().getProp("UseTCK"):
-        resetTransform()
-    else:
-        appendPostConfigAction(resetAction)

Hlt/Moore/tests/options/tckcheck.py

-import os
-from TCKUtils.utils import *
-
-TCK1=0x00ed1606
-TCK2=0x00ee1606
-TCK3=0x00ef1606
-configdest="../../../../InstallArea/$CMTCONFIG"
-
-ConfigAccessSvc().File = os.path.join(configdest, "config.cdb")
-print "============= diffs zero->1 event ==============="
-diff(TCK1,TCK2)
-print "============= diffs 1->100 events ==============="
-diff(TCK2,TCK3)

Hlt/Moore/tests/options/tckgen.py

-#test to check if I can make a TCK
-#needs numEvents and targetTCK to be defined already, which is done in your python shell or a different file
-
-#creationString="created Aliases/TOPLEVEL/"
-#existsString="trying to read Aliases/TOPLEVEL/"
-existsString="top id for this config:"
-
-mysplit=''
-try:
-    mysplit=split
-except:
-    pass
-
-label="Test TCK from nightly builds, auto-generated in nightlies based on some physics threshold setting."
-releaseString="----MOORERELEASE----:"
-thresholdString="----MOORETHRESHOLD----:"
-
-configsource="$HLTTCKROOT"
-f=open("../options/Moore-LocalTCKData.py")
-configdest=f.read().split("'")[1]
-f.close()
-
-commandoptions  = "from Configurables import Moore; Moore().OutputLevel = 4; Moore().generateConfig=True; Moore().ForceSingleL0Configuration = True; Moore().EvtMax="+str(numEvents)+"; Moore().configLabel=\""+label+"\"; print \""+releaseString+"\", Moore().getRelease(); print \""+thresholdString+"\", Moore().ThresholdSettings; Moore().EnableTimer=False;"
-commandoptions += "from Configurables import HltConf; HltConf().L0TCK = \"0x%s\"; print Moore();" % targetTCK[-4:]
-commandoptions = "'%s'"%commandoptions
-
-if mysplit=="Hlt1":
-    commandoptions = commandoptions.replace("import Moore;",'import Moore; Moore().Split=\"Hlt1";')
-
-if mysplit=="Hlt2":
-    commandoptions = commandoptions.replace("import Moore;",'import Moore; Moore().Split="Hlt2";')
-
-
-def expp(apath):
-    return os.path.abspath(os.path.expandvars(os.path.expanduser(apath)))
-
-import os
-if not os.path.exists(expp(configsource)) or not os.path.exists(expp(configdest)):
-    print configsource, configdest, expp(os.getcwd())
-    raise IOError("Local filesystem not like install area, aborting")
-
-if not os.path.exists(os.path.join(expp(configdest),"config.cdb")):
-    print "copying config file"
-    import shutil
-    shutil.copy2(os.path.join(expp(configsource),"config.cdb"), os.path.join(expp(configdest),"config.cdb"))
-
-print "modified config in: "+ os.path.join(expp(configdest),"config.cdb")
-
-#run events
-print "running",numEvents
-import commands
-status,output = commands.getstatusoutput("gaudirun.py ../options/Moore_Hlt1And2.py ../options/default-threshold.py ../options/Moore-LocalTCKData.py ../options/Input_Default.py --option="+commandoptions)
-print output
-
-if "FATAL" in output or existsString not in output:
-    
-    raise ValueError("Something went wrong in the gaudirun step")
-
-def findme(searchstring,output):
-    loc=output.find(searchstring)+len(searchstring)
-    eol=output.find('\n',loc)
-    return output[loc:eol].strip()
-
-configuration=findme(existsString,output)
-threshold=findme(thresholdString,output)
-release=findme(releaseString,output)
-
-
-print "===================================================="
-print release, threshold, configuration
-print "===================================================="
-
-#
-from TCKUtils.utils import *
-from Configurables import ConfigCDBAccessSvc as ctas
-ctas(File=os.sep.join([configdest,"config.cdb"]))
-configs=getConfigurations()
-search="/".join(["TOPLEVEL",release,threshold,configuration])
-
-if search not in configs.keys():
-    raise KeyError("Configuration I just created has not been found... looking for " + search)
-
-createTCKEntries({targetTCK:configuration},ctas(Mode='ReadWrite',File=os.sep.join([configdest,"config.cdb"])))
-ctas(Mode='ReadOnly',File=os.sep.join([configdest,"config.cdb"]))
-
-configs=getConfigurations()
-if search not in configs.keys():
-    raise KeyError("Configuration I just created has not been found... looking for"+search)
-
-if int(targetTCK,16) not in configs[search].info['TCK']:
-    raise ValueError("TCK I asked to be created was not created for this threshold setting")
-
-configs[search].printSimple()
-print "===================================================="
-print "PASS"

Hlt/Moore/tests/options/tcksteerhundredevents.py

-numEvents=100
-targetTCK='0x00ef1606'
-execfile("../options/tckgen.py")

Hlt/Moore/tests/options/tcksteeroneevent.py

-numEvents=1
-targetTCK='0x00ee1606'
-execfile("../options/tckgen.py")

Hlt/Moore/tests/options/tcksteerzeroevents.py

-numEvents=0
-targetTCK='0x00ed1606'
-execfile("../options/tckgen.py")

Hlt/Moore/tests/options/tistostest.py

-from Configurables import Moore
-
-from Configurables import RecombineRawEvent
-RecombineRawEvent()
-
-Moore().ForceSingleL0Configuration = False
-evtmax=3000
-Moore().EvtMax = evtmax
-Moore().OutputLevel =3
-Moore().UseTCK = False
-Moore().ThresholdSettings="Physics_pp_Draft2016"
-Moore().DataType   = "2012"
-Moore().Split = ''
-Moore().Simulation = True
-Moore().CheckOdin = False
-Moore().EnableDataOnDemand = True
-Moore().WriterRequires = []
-Moore().RemoveInputHltRawBanks=True
-Moore().DDDBtag   = "dddb-20130929-1"
-Moore().CondDBtag = "sim-20131023-vc-md100"
-
-
-from GaudiConf import IOHelper
-IOHelper().inputFiles( [ "PFN:root://castorlhcb.cern.ch//castor/cern.ch/user/s/sbenson/TempTestFiles/00026133_00000013_1.allstreams.dst" ] ) 
-
-from Configurables import Hlt__Service
-Hlt__Service().Pedantic = False
-from Configurables import DataOnDemandSvc
-from Configurables import DstConf, CaloDstUnPackConf
-CaloDstUnPackConf().Enable=True
-DstConf().EnableUnpack= ["Reconstruction","Stripping"]
-from Configurables import L0MuonAlg
-L0MuonAlg("L0Muon").L0DUConfigProviderType="L0DUConfigProvider"
-from Configurables import L0Conf
-L0Conf().EnableL0DecodingOnDemand = True
-L0Conf().FastL0DUDecoding = True
-L0Conf().DecodeL0DU = True
-L0Conf().TCK = '0x0045'
-
-#from Configurables import Hlt2Conf
-#Hlt2Conf().Hlt1TrackOption = "Rerun"
-
-import GaudiPython
-from Gaudi.Configuration import ApplicationMgr
-from Configurables import LoKiSvc
-
-appMgr = ApplicationMgr()
-#
-from Configurables import EventNodeKiller
-enk = EventNodeKiller('KillTrigRawEvent')
-enk.Nodes = [ "Hlt","Hlt1","Hlt2" ]
-appMgr.TopAlg.insert( 0,  enk.getFullName() ) 
-#
-appMgr.ExtSvc += ['DataOnDemandSvc'] #breaks for real data
-appMgr.ExtSvc += ['ToolSvc', 'DataOnDemandSvc', LoKiSvc()]
-#appMgr.TopAlg += [ seq ]
-gaudi = GaudiPython.AppMgr(outputlevel=4)
-gaudi.initialize()
-
-gaudi.algorithm('Hlt').Enable = False
-gaudi.algorithm('KillTrigRawEvent').Enable = False
-triggerTisTosTool = gaudi.toolsvc().create('TriggerTisTos', interface='ITriggerTisTos')
-triggerTisTosTool1 = gaudi.toolsvc().create('Hlt1TriggerTisTos', interface='ITriggerTisTos')
-triggerTisTosTool2 = gaudi.toolsvc().create('Hlt2TriggerTisTos', interface='ITriggerTisTos')
-tes = gaudi.evtsvc()
-
-hlt1names = [ 
-        "Hlt1TrackAllL0Decision"
-        ]
-
-hlt2names = [ 
-        "Hlt2IncPhiDecision"
-        ]
-
-offlineLoc ="/Event/AllStreams/Phys/BetaSBs2PhiPhiLine/Particles"
-count_hlt1_Dec={}
-count_hlt1_TOS={}
-for trigger in hlt1names:
-    count_hlt1_Dec.update( { trigger : 0 } )
-    count_hlt1_TOS.update( { trigger : 0 } )
-count_hlt2_Dec={}
-count_hlt2_TOS={}
-for trigger in hlt2names:
-    count_hlt2_Dec.update( { trigger : 0 } )
-    count_hlt2_TOS.update( { trigger : 0 } )
-
-i=0
-n=0
-#while True:
-while n<evtmax:
-    n+=1
-    gaudi.run(1) 
-    #
-    gaudi.executeEvent()
-    gaudi.algorithm("KillTrigRawEvent").execute()
-    gaudi.algorithm("Hlt").execute()
-    if i==0:
-        tes.dump()
-
-    split = True
-    if not tes["Hlt1/SelReports"]:
-        split = False
-
-    if not tes['/Event/DAQ/RawEvent']:
-        print "End of file"
-        break
-    
-    cands = tes[offlineLoc]
-    if not cands:
-        continue
-    for cand in cands:
-        i+=1
-        triggerTisTosTool.setOfflineInput(cands[0])
-        triggerTisTosTool1.setOfflineInput(cands[0])
-        triggerTisTosTool2.setOfflineInput(cands[0])
-        #
-        for trigger in hlt1names:
-            if split == True:
-                triggerTisTosTool1.setTriggerInput(trigger)
-                classified = triggerTisTosTool1.tisTosTobTrigger()
-                if classified.decision() == True:
-                    count_hlt1_Dec[trigger]+=1
-                if classified.tos() == True:
-                    count_hlt1_TOS[trigger]+=1
-            else:
-                triggerTisTosTool.setTriggerInput(trigger)
-                classified = triggerTisTosTool.tisTosTobTrigger()
-                if classified.decision() == True:
-                    count_hlt1_Dec[trigger]+=1
-                if classified.tos() == True:
-                    count_hlt1_TOS[trigger]+=1 
-        #
-        for trigger in hlt2names:
-            if split == True:
-                triggerTisTosTool2.setTriggerInput(trigger)
-                classified = triggerTisTosTool2.tisTosTobTrigger()
-                if classified.decision() == True:
-                    count_hlt2_Dec[trigger]+=1
-                if classified.tos() == True:
-                    count_hlt2_TOS[trigger]+=1
-            else:
-                triggerTisTosTool.setTriggerInput(trigger)
-                classified = triggerTisTosTool.tisTosTobTrigger()
-                if classified.decision() == True:
-                    count_hlt2_Dec[trigger]+=1
-                if classified.tos() == True:
-                    count_hlt2_TOS[trigger]+=1
-# print efficiencies
-print "Hlt1 efficiencies"
-print "Trigger"+"   "+"Eff. (Decision)"+"   "+"Eff. (TOS)"
-for trigger in hlt1names:
-    print trigger+"   "+str( round(float(count_hlt1_Dec[trigger]) / float(i),2) )+"   "+str( round(float(count_hlt1_TOS[trigger]) / float(i),2) )
-print "Hlt2 efficiencies"
-print "Trigger"+"   "+"Eff. (Decision)"+"   "+"Eff. (TOS)"
-for trigger in hlt2names:
-    print trigger+"   "+str( round(float(count_hlt2_Dec[trigger]) / float(i),2) )+"   "+str( round(float(count_hlt2_TOS[trigger]) / float(i),2) )